以纯Al2O3粉、Mg(NO3)2·6H2O、Y(NO3)3·6H2O为原料,于1500℃、1600℃和1700℃常压制备了高纯Al2O3陶瓷,研究了烧结温度和烧结助剂的含量对Al2 O3陶瓷密度、硬度及微观结构的影响.结果表明,添加剂的作用受烧结温度的影响较大,进而影响了烧结体的硬度.
Al2O3 ceramics are fabricated using high-purity Al2O3 powder,Mg(NO3)2 · 6H2O, and Y(NO3)3 ·6H2O as the raw material,sintered at 1500℃, 1600℃, 1700℃ without pressure. Effects of sintering temperatures and additives on the final density,hardness and microstructure are studied. The results show that the effects of sintering additives are influenced by sintering temperatures,then hardness is effected.
参考文献
| [1] | MAC-A999R[DB/OL].http://www morganadvancedceramics.com/members/ |
| [2] | 刘国祥 .影响氧化铝陶瓷烧结的因素[J].江苏陶瓷,2000,33(01):19. |
| [3] | 曲远方.功能陶瓷及应用[M].北京:化学工业出版社,2003 |
| [4] | Bennison S J;Harmer M P .Effect of MgO solute on sorface diffusion in sapphire and the rale of MgO in the sintering of Al2O3[J].Journal of the American Ceramic Society,1990,73(04):833. |
| [5] | 张伟儒,孙峰,田庭燕,陈波,王培.低温制备≥99.5%多晶氧化铝陶瓷[J].人工晶体学报,2007(05):1109-1112. |
| [6] | 邓毅超,周竹发.Y3+掺杂对Al2O3陶瓷硬度的影响[J].佛山陶瓷,2007(05):8-11. |
| [7] | 廖荣,刘英,王慧,朱志斌,程燕羲.氧化铝粉体对氧化铝陶瓷制品性能的影响[J].现代技术陶瓷,2001(04):35-38. |
| [8] | 张立德.超微粉制备与应用技术[M].北京:中国石化出版社,2001:273. |
| [9] | 曹南萍,王仲军,南小英,欧阳芳,王静海.降低高铝瓷烧成温度的研究[J].硅酸盐通报,2006(04):150-155. |
| [10] | Rao Pinggen et al.Properties of low-temperature-sintered high purity α-alumina ceramics[J].Journal of Materials Science Letters,2000,19:543. |
| [11] | Cinibulk Michael K .Effect of yttia and yttrium-aluminun garnet on densification and grain growth of alumina at 1200～1300℃[J].Journal of the American Ceramic Society,2004,87(04):692. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%