The growth, transformation, and lattice structure of intermetallic compounds formed between Sn-0.3Ag-0.7Cu lead-free solder and copper substrate were investigated. Dip soldering was used to initiate the reaction between the solder and substrate. An r/-Cu6Sn5 intermetallic phase possessing a hexagonal lattice structure was found at the as-soldered interface. Thermal aging at a number of conditions resulted in the formation of a CuaSn intermetallic phase between the Cu6Sn5 layer and the copper substrate, e-Cu3Sn with an orthorhombic lattice structure was found together with hexagonal CusSn. Subsequently, the activation energies of the intermetallic phases were calculated and compared to results obtained from the literature. The comparison showed that good agreement existed between the findings from this study and literature data within a similar temperature range.
参考文献
| [1] | A.R. Zbrzezny;P. Snugovsky;D.D. Perovic .Impact of board and component metallizations on microstructure and reliability of lead-free solder joints[J].Microelectronics and reliability,2007(12):2205-2214. |
| [2] | K. S. Kim;S. H. Huh;K. Suganuma .Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):226-236. |
| [3] | M.J. Rizvi;Y.C. Chan;C. Bailey .Effect of adding 1 wt percent Bi into the Sn-2.8Ag-0.5Cu solder alloy on the intermetallic formations with Cu-substrate during soldering and isothermal aging[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2006(1/2):208-214. |
| [4] | C.K. Wong;J.H.L. Pang;J.W. Tew;B.K. Lok;H.J. Lu;F.L. Ng;Y.F. Sun .The influence of solder volume and pad area on Sn-3.8Ag-0.7Cu and Ni UBM reaction in reflow soldering and isothermal aging[J].Microelectronics and reliability,2008(4):611-621. |
| [5] | M.J. Rizvi;C. Bailey;Y.C. Chan .Effect of adding 0.3 wt percent Ni into the Sn-0.7 wt percent Cu solder Part II. Growth of intermetallic layer with Cu during wetting and aging[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):122-128. |
| [6] | D.Q. Yu;C.M.L. Wu;C.M.T. Law .Intermetallic compounds growth between Sn-3.5Ag lead-free solder and Cu substrate by dipping method[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1/2):192-199. |
| [7] | L.L. Duan;D.Q. Yu;S.Q. Han .Microstructural evolution of Sn-9Zn-3Bi solder/Cu joint during long-term aging at 170 deg C[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):202-207. |
| [8] | D.Q. Yu;C.M.L. Wu;C.M.T. Law .Intermetallic compounds growth between Sn-3.5Ag lead-free solder and Cu substrate by dipping method[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1/2):192-199. |
| [9] | K. H. PRAKASH;T. SRITHARAN .INTERFACE REACTION BETWEEN COPPER AND MOLTEN TIN-LEAD SOLDERS[J].Acta materialia,2001(13):2481-2489. |
| [10] | J.F. Li;P.A. Agyakwa;C.M. Johnson .Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process[J].Acta materialia,2011(3):1198-1211. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%