采用放电等离子烧结技术制备了热压/热变形NdFeB磁体.研究了不同烧结温度对热压磁体、热变形磁体微观结构及磁性能的影响.结果表明,随烧结温度的升高,磁体密度上升,680℃时已达理论密度的99.7%;另一方面,晶粒则随温度的增加发生长大.剩磁和最大磁能积受密度和晶粒大小的交互作用,在650℃时达最大:(BH)m=129kJ/m3,Br=0.87T,Hci=914kA/m.热变形后,磁体主相晶粒的c轴逐渐转向与压力平行的方向,形成磁晶各向异性,使磁体的剩磁和最大磁能积大幅增加.热压烧结温度对热变形磁体的磁性能有着极大影响,其剩磁和最大磁能积随热压温度的升高先升高后降低,620℃热压后,热变形磁体磁性能达最大:(BH)m=339kJ/m3, Br=1.49T, Hci=576kA/m.
参考文献
[1] | Fischer R;Schrefl T;Kromm üller H et al.[J].Journal of Magnetism and Magnetic Materials,1996,153:35-49. |
[2] | Chen Z M;Wu Y Q et al.[J].Journal of Magnetism and Magnetic Materials,2004,268:105-113. |
[3] | 祝景汉.快淬钕铁硼永磁合金及粘结磁体[J].粉末冶金工业,2000(01):40-45. |
[4] | Schrefl T;Fidler J;Kromm üller H .[J].Physical Review B:Condensed Matter,1994,49(09):6100-6110. |
[5] | 刘世强,李东,黄美清,金娥实,沈玉辉,何阳生,陈红兵.各向异性纳米晶复合稀土磁体的研制[J].磁性材料及器件,2007(04):1-10. |
[6] | Huang B .[J].Technology &Equipment,2006,1:15-19. |
[7] | Tokita M.Trends in Advanced SPS Systems and FGM Technolgy[A].Tokyo,Japan,1999 |
[8] | Tetsuji Saito;Tomonari Takeuchi;Hiroyuki Kageyama .Production of Bulk Amorphous and Nanocomposite Nd_(4)Fe_(77.5)B_(18.5) Materials by Spark Plasma Sintering Method[J].IEEE Transactions on Magnetics,2004(4):2880-2882. |
[9] | Saito T;Takeuchi T;Kageyama H .[J].Journal of Applied Physics,2005,97(10):103-106. |
[10] | Yue M;Tian M;Zhang JX;Zhang DT;Niu PL;Yang F .Microstructure and magnetic properties of anisotropic Nd-Fe-B magnets produced by spark plasma sintering technique[J].Materials Science & Engineering, B. Solid-State Materials for Advanced Technology,2006(1/3):18-21. |
[11] | Ming Yue;Jiuxing Zhang;Yaofu Xiao;Gongping Wang;Tao Li .New Kind of NdFeB Magnet Prepared by Spark Plasma Sintering[J].IEEE Transactions on Magnetics,2003(6):3551-3553. |
[12] | 王公平,岳明,张久兴,刘卫强.放电等离子烧结制备高性能NdFeB永磁材料[J].中国有色金属学报,2006(03):459-463. |
[13] | 姚修楠,孙爱芝,李琪,许用华.块体各向异性纳米复合永磁材料的制备[J].金属功能材料,2007(01):5-8. |
[14] | Kwon H W;Kang Y S;Choi G S et al.[J].IEEE Transactions on Magnetics,2009,45(06):2590-2593. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%