中间包流体流动直接影响连铸坯的质量,为了缩小非对称中间包两流之间的流动差异,利用水模型和数值模拟方法,研究了侧孔长水口中间包流体流动特性。研究结果表明：直通型长水口、圆形湍流控制器和单挡墙结构中间包两出口流体差异较大,侧孔长水口和多孔挡墙结构中间包两流之间平均停留时间差异是直通型长水口中间包的3/4,且近长水口侧出口的平均停留时间延长7.7%。
Fluid flow in the tundish was one of the key factors to affect the slab quality.In order to decrease the difference of fluid flow between two strands,water model method and numerical simulation method were applied to investigate the fluid flow character in an asymmetric two-strand tundish.Exermental results show that there are greater difference of fluid flow between two strand in the tundish with straight shroud,circular turbulent inhibitor and single dam.But by using shroud with side-hole and multi-hole baffle,the difference of the anerage residue time between two strands is only 3/4 of that in the tundish with straight shroud,circular turbulent inhibitor and single dam.And the average residue time at the strand near the shroud rises by 7.7%.
参考文献
| [1] | Liu S X;Yang X M .Hydrodynamic and Mathematical Simu- lations of Flow Field and Temperature Profile in An Asym- metrical T-Type Single-Strand[J].ISIJ International,2008,48(12):1712. |
| [2] | Tripathi A;Ajmani S K .Numerical Investigation of Fluid Flow Phenomenon in a Curved Shape Ttundish of Billet Cast- er[J].ISIJ International,2005,45(11):1616. |
| [3] | Craig K J;Kock D J .Design Optimization of a Single-Strand Continuous Caster Tundish Using Rosidence Time Distrbu- ition Date[J].ISIJ International,2001,41(10):1194. |
| [4] | Jhap K;Rao P S;Dewan A .Effect of Height and Position of Dams on Inclnsion Removal in A Six Strand Tundish[J].ISIJ International,2008,48(02):154. |
| [5] | 金友林,包燕平,李志斌,刘成志,卫争艳.板坯连铸单流中间包控流装置优化模拟研究[J].炼钢,2009(02):48-51,73. |
| [6] | 雷洪;赫冀成 .一种用于连铸中间包的钢包侧孔旋流长水口[P].中国,200820219776.2,2009-09-30. |
| [7] | 郑淑国,朱苗勇.多流连铸中间包内钢液流动特性的分析模型[J].金属学报,2005(10):1073-1076. |
| [8] | 雷洪,赵岩,鲍家琳,刘承军,陈海耿,赫冀成.多流连铸中间包停留时间分布曲线总体分析方法[J].金属学报,2010(09):1109-1114. |
| [9] | Zhong L;Li B;Zhu Y .Fluid Flow in A Four-Strand Bloom Continuous Casting Tundish With Different Flow Modifiers[J].ISIJ International,2008,48(02):88. |
| [10] | 樊俊飞;张清郎;朱苗勇 等.六流T形连铸中间包控流参数优化的水模研究[J].钢铁,1998,33(05):24. |
| [11] | 郑淑国,朱苗勇.多流连铸中间包各流流动特性一致性的判别[J].过程工程学报,2006(04):522-526. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%