对新型镍基粉末高温合金FGH98 Ⅰ分别进行亚固溶前处理+过固溶和过固溶热处理,利用光学显微镜,场发射扫描电镜和显微硬度仪研究冷却速度对合金组织与显微硬度的影响.结果表明:过固溶处理前的亚固溶前处理使锻态合金中大晶界γ'相发生部分溶解,晶粒稍有长大,对过固溶热处理冷却γ'相析出的影响不显著；随着冷速增加,合金中二次和三次γ'相的尺寸减小,二次γ'相的形状从蝶形向球形转变,γ '相的颗粒密度增大,面积分数减小,在冷却速度≤1.4℃/s时,γ'相分两阶段形核；冷速越快,合金的硬度越高,时效后硬度增高越多.另外,还建立了冷速与γ '相平均尺寸和合金硬度之间的函数关系式.该结果为FGH98 Ⅰ合金实际双性能盘固溶热处理工艺的选择提供了理论参考.
参考文献
| [1] | Williams J C;Starke E A .[J].Acta Materialia,2003,51:5775. |
| [2] | Mao J.;Chang KM.;Yang WH.;Furrer DU.;Ray K.;Vaze SP. .Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):318-329. |
| [3] | Gabb T P;Ellis D L;Kenneth M et al.NASA/TM-2004-213066[R].Washington,D C:National Aeronautics and Space Administration,2004. |
| [4] | 刘新灵,陈星,侯学勤,陶春虎.FGH95粉末冶金高温合金损伤与断裂特性研究[J].稀有金属材料与工程,2009(07):1179-1183. |
| [5] | 宁永权,姚泽坤,岳太文,郭鸿镇,陶宇,张义文.FGH4096合金"项链"组织研究[J].稀有金属材料与工程,2009(10):1783-1786. |
| [6] | 吴凯,刘国权,胡本芙,吴昊,张义文,陶宇,刘建涛.合金元素对新型镍基粉末高温合金的热力学平衡相析出行为的影响[J].北京科技大学学报,2009(06):719-727. |
| [7] | Furrer D;Fecht H .[J].Journal of Metals,1999,51:14. |
| [8] | Bhowal P R;Wright E F;Raymond E L;Raymond E L .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21:1709. |
| [9] | Wlodek S T;Kelly M;Alden D A.Superalloy 1996[M].Warrendale PA:TMS,1996:129. |
| [10] | 涂干云;杨士仲;吴剑涛 .[J].金属热处理学报,1997,18(03):23. |
| [11] | Jackson M P;Reed R C .[J].Materials Science and Engineering A,1999,259(01):85. |
| [12] | 何峰,汪武祥,杨万宏,邹金文,王旭青,韩雅芳.粉末涡轮盘力学性能的计算机预测[J].航空材料学报,2000(03):102-107. |
| [13] | Mao J;Chang K M;Yang W H et al.[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,32:2441. |
| [14] | Mao J.;Chang KM.;Yang WH.;Furrer DU.;Ray K.;Vaze SP. .Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):318-329. |
| [15] | Mitchell RJ;Preuss M;Tin S;Hardy MC .The influence of cooling rate from temperatures above the gamma ' solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):158-165. |
| [16] | Sajjadi S A;Elahifar H R;Farhangi H .[J].Journal of Alloys and Compounds,2008,455:215. |
| [17] | Tian G F;Jia C C;Wen Y et al.[J].Rare Metals,2008,27(04):410. |
| [18] | Kozar R W;Suzuki A;Mill igan W W et al.[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2009,40(07):1588. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%