阐述了镁合金应变硬化行为的研究现状;概括了组织参数对镁合金应变硬化行为的影响;提出此研究领域尚需解决的科学问题。镁合金的应变硬化行为与激活变形模式的类型和数量有密切的关系。此外,织构、固溶元素、析出相和晶粒尺寸等组织参数对滑移和孪生主导变形的应变硬化行为都有较大的影响。目前,组织参数与应变硬化行为的关系还需要更加系统的研究。此外,有必要研究和开发适用于镁合金的应变硬化理论模型。
Some aspects of the present research on the strain hardening behavior at room temperature in wrought magnesium alloys were reviewed. The influence of the typical microstructure parameters on the strain hardening behavior of magnesium alloys was also discussed. Finally, a few critical scientific problems in this research field were pointed out. The strain hardening behavior of magnesium alloys exhibited a strong dependence on the type and amount of active deformation modes. Moreover, both the strain hardening behavior dominated by dislocation slip and twinning can be greatly influenced by texture, solid solution element, precipitate and grain size. Currently, the relationship between the microstructure and strain hardening behavior has not been symmetrically studied. Furthermore, further works are needed to study and develop the strain hardening model suitable for magnesium alloys.
参考文献
[1] | AVEDESIAN M M;BAKER H.ASM specialty handbook:Magnesium and magnesium alloys[M].Ohio:ASM International,1999:274. |
[2] | 陈振华.变形镁合金[M].北京:化学工业出版社,2005:5-26. |
[3] | 刘庆.镁合金塑性变形机理研究进展[J].金属学报,2010(11):1458-1472. |
[4] | 辛仁龙,刘庆.镁合金塑性变形力学行为与微观组织研究进展[J].中国材料进展,2011(02):16-28. |
[5] | 宋波,辛仁龙,刘庆.析出相对镁合金变形机理影响的研究进展[J].中国有色金属学报,2011(11):2719-2731. |
[6] | CALLISTER W D Jr.Material science and egineering:An introduction[M].New York:John Wiley and Sons,Inc,2005:171. |
[7] | HOSFORD W F.Mechanical behavior of materials[M].Cambridge University Press,2005:70-79. |
[8] | CHENG L M;POOLE W J;EMBURY J D;LLOYD D J .The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2003,34:2473-2481. |
[9] | 唐伟琴,张少睿,范晓慧,李大永,彭颖红.AZ31镁合金的织构对其力学性能的影响[J].中国有色金属学报,2010(03):371-377. |
[10] | 丁文江,靳丽,吴文祥,董杰.变形镁合金中的织构及其优化设计[J].中国有色金属学报,2011(10):2371-2381. |
[11] | SONG B;XIN R;LIANG Y;CHEN G, LIU Q.Twinning characteristic and variant selection in compression of a pre-side-rolled Mg alloy sheet[J].Materials Science and Engineering A |
[12] | 李淑波,吴昆,郑明毅,熊守美.挤压对AZ91铸造镁合金力学性能的影响[J].材料工程,2006(12):54-57. |
[13] | J. A. del Valle;F. Carreno;O. A. Ruano .Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling[J].Acta materialia,2006(16):4247-4259. |
[14] | Lan Jiang;John J. Jonas;Alan A. Luo;Anil K. Sachdev;Stephane Godet .Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):302-309. |
[15] | J. Koike;T. Kobayashi;T. Mukai;H. Watanabe;M. Suzuki;K. Maruyama;K. Higashi .The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys[J].Acta materialia,2003(7):2055-2065. |
[16] | J. Koike;R. Ohyama .Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature[J].Acta materialia,2005(7):1963-1972. |
[17] | J.D. Robson;N. Stanford;M.R. Barnett .Effect of precipitate shape on slip and twinning in magnesium alloys[J].Acta materialia,2011(5):1945-1956. |
[18] | S. Kleiner;P.J. Uggowitzer .Mechanical anisotropy of extruded Mg-6% Al-1% Zn alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):258-263. |
[19] | 刘培,信运昌,刘庆.AZ31镁合金的各向异性及断裂行为[J].中国有色金属学报(英文版),2011(04):880-884. |
[20] | YIN D L;WANG J T;LIU J Q;ZHANG X .On tension-compression yield asymmetry in an extruded Mg-3Al-1Zn alloy[J].Journal of Alloys and Compounds,2009,478:789-795. |
[21] | Xinsheng Huang;Kazutaka Suzuki;Akira Watazu;Ichinori Shigematsu;Naobumi Saito .Mechanical properties of Mg–Al–Zn alloy with a tilted basal texture obtained by differential speed rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):214-220. |
[22] | Bo Song;Guangsheng Huang;Hongcheng Li .Texture evolution and mechanical properties of AZ31B magnesium alloy sheets processed by repeated unidirectional bending[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2010(2):475-481. |
[23] | BARNETT M R;KESHAVARZ Z;BEER A G;ATWELL D .Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn[J].Acta Materialia,2004,52:5093-5103. |
[24] | Guo, L.;Chen, Z.;Gao, L. .Effects of grain size, texture and twinning on mechanical properties and work-hardening behavior of AZ31 magnesium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(29/30):8537-8545. |
[25] | Takayuki Kobayashi;Junichi Koike;Yu Yoshida .Grain Size Dependence of Active Slip Systems in an AZ31 Magnesium Alloy[J].日本金属学会誌,2003(4):149-152. |
[26] | Renlong Xin;Bo Song;Ke Zeng;Guangjie Huang;Qing Liu .Effect of aging precipitation on mechanical anisotropy of an extruded Mg-Y-Nd alloy[J].Materials & design,2012(Feb.):384-388. |
[27] | Yakubtsov, IA;Diak, BJ;Sager, CA;Bhattacharya, B;MacDonald, WD;Niewczas, M .Effects of heat treatment on microstructure and tensile deformation of Mg AZ80 alloy at room temperature[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):247-255. |
[28] | Xianhua Chen;Fusheng Pan;Jianjun Mao;Jingfeng Wang;Dingfei Zhang;Aitao Tang;Jian Peng .Effect of heat treatment on strain hardening of ZK60 Mg alloy[J].Materials & design,2011(3):1526-1530. |
[29] | E. Ma;Y. M. Wang;Q. H. Lu;M. L. Sui;L. Lu;K. Lu .Strain hardening and large tensile elongation in ultrahigh-strength nano-twinned copper[J].Applied physics letters,2004(21):4932-4934. |
[30] | Tingting Liu;Fusheng Pan;Xiyan Zhang .Effect of Sc addition on the work-hardening behavior of ZK60 magnesium alloy[J].Materials & design,2013(Jan.):572-577. |
[31] | K. Mathis;Z. Trojanova;P. Lukac .Modeling of hardening and softening processes in Mg alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):176-179. |
[32] | 宋波 .沉淀相与孪晶强化镁合金塑性变形行为及各向异性研究[D].重庆大学,2013. |
[33] | WANG B;XIN R;HUANG G;LIU Q .Strain rate and texture effects on microstructural characteristics of AZ31 Mg alloy during compression[J].Scripta Materialia,2012,66(05):239-242. |
[34] | YOO M .Slip,twinning,and fracture in hexagonal close-packed metals[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1981,12(03):409-418. |
[35] | L. Jiang;J.J. Jonas;R.K. Mishra;A.A. Luo;A.K. Sachdev;S. Godet .Twinning and texture development in two Mg alloys subjected to loading along three different strain paths[J].Acta materialia,2007(11):3899-3910. |
[36] | Marko Knezevic;Amanda Levinson;Ryan Harris;Raja K. Mishra;Roger D. Doherty;Surya R. Kalidindi .Deformation twinning in AZ31: Influence on strain hardening and texture evolution[J].Acta materialia,2010(19):6230-6242. |
[37] | Surya R. Kalidindi;Abhishek Bhattacharyya;Roger D. Doherty .How Do Polycrystalline Materials Deform Plastically?[J].Advanced Materials,2003(16):1345-1348. |
[38] | Wang, B.;Xin, R.;Huang, G.;Liu, Q..Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:588-593. |
[39] | Seong-Gu Hong;Sung Hyuk Park;Chong Soo Lee .Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy[J].Acta materialia,2010(18):5873-5885. |
[40] | Sung Hyuk Park;Seong-Gu Hong;Chong Soo Lee .Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy[J].Scripta materialia,2010(4):202-205. |
[41] | Seong-Gu Hong;Sung Hyuk Park;Chong Soo Lee .Strain path dependence of {1 0 -1 2} twinning activity in a polycrystalline magnesium alloy[J].Scripta materialia,2011(2):145-148. |
[42] | Li, Y.;Enoki, M..Twinning behavior of pure magnesium quantitatively investigated by acoustic emission[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:8-13. |
[43] | Bo Song;Renlong Xin;Gang Chen .Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling[J].Scripta materialia,2012(12):1061-1064. |
[44] | Song, B.;Xin, R.;Sun, L.;Chen, G.;Liu, Q..Enhancing the strength of rolled ZK60 alloys via the combined use of twinning deformation and aging treatment[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:68-75. |
[45] | CLARK J B .Transmission electron microscopy study of age hardening in a Mg-5 wt.%Zn alloy[J].ACTA METALLURGICA,1965,13:1281-1289. |
[46] | CHUN J S;BYRNE J G;BORNEMANN A .The inhibition of deformation twinning by precipitates in a magnesium-zinc alloy[J].Philosophical Magazine,1969,20:291-300. |
[47] | J. Jain;W.J. Poole;C.W. Sinclair .Reducing the tension-compression yield asymmetry in a Mg-8Al-0.5Zn alloy via precipitation[J].Scripta materialia,2010(5):301-304. |
[48] | J.D. Robson;N. Stanford;M.R. Barnett .Effect of particles in promoting twin nucleation in a Mg–5 wt.% Zn alloy[J].Scripta materialia,2010(8):823-826. |
[49] | N. Stanford;A.S. Taylor;P. Cizek .{1012} Twinning in magnesium-based lamellar microstructures[J].Scripta materialia,2012(7/8):704-707. |
[50] | AGNEW S R;YOO M H;TOMé C N .Application of texture simulation to understand mechanical behavior of Mg and solid solution alloys containing Li or Y[J].Acta Materialia,2001,49:4277-4289. |
[51] | 杨续跃,张雷,姜育培,朱亚坤.Mg-Y及AZ31镁合金高温变形过程中微观织构的演化[J].中国有色金属学报,2011(02):269-275. |
[52] | Horng-Yu Wu;Feng-Zheng Lin .Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet[J].Materials Science & Engineering. A, Structural Materials: Properties, Misrostructure and Processing,2010(4/5):1194-1199. |
[53] | CAO X;JAHAZI M;AL-KAZZAZ H;MEDRAJ M .Modelling of work-hardening behaviour for laser welded magnesium alloy[J].Internal Journal of Materials Research,2008,99:216-221. |
[54] | C.H. Caceres;A.H. Blake .On the strain hardening behaviour of magnesium at room temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1-2):193-196. |
[55] | Qiao, Y.;Wang, X.;Liu, Z.;Wang, E..Effects of grain size, texture and twinning on mechanical properties and work-hardening behaviors of pure Mg[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:240-246. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%