Based on the MAS rolling process in plate mill, the mathematical models of forward and backward slips of the wedges at plate head and tail were derived. According to the new model, the difference between the forward slip of the wedge and that of the normal part of the plate is obviously very small. The deviation is less than 2.5% in general. Thus, in actual application, the forward slip of normal part of the plate can be used to calculate the length of rolled plate instead of the derived model. The rationality of this simplified method was confirmed with the application in Shougang 3 500 mm plate mill. The test results showed that the wedges of plate head and tail are symmetrical. The plate width deviation is greatly decreased by using the MAS method.
参考文献
| [1] | SUN Ben-rong;WANG You-min;CHENG Yin.Plate Processing[M].北京:冶金工业出版社,1993 |
| [2] | Omata K;Tsukampto H;Naba Y et al.Optimal Size Control in Plate Rolling[J].Tetsu-to-Hagane,1981,67(15):2443-2451. |
| [3] | Wada B;Furukawa H .Automatic Plan View Pattern Control and Automatic Gauge Control for Heavy Plate Mill[J].Sumimoto Metals,1998,50(01):79-87. |
| [4] | SUN Yi-kang.Mathematic Models of Computer Control for Strip Hot Tandem Mill[M].北京:冶金工业出版社,1979 |
| [5] | JIAO Zhi-jie .Development and Application of Process Control System for Plate Mill[D].东北大学,2004. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%