取向硅钢成品的晶粒尺寸非常大,其易磁化方向[001]晶向对于轧向的偏差角度对其磁性能影响极大.本文介绍了取向硅钢二次再结晶后成品晶粒位向的几种测定方法,包括侵蚀法、劳厄法、OIM法、极图法和非对称X射线衍射法等,并对这几种测量方法进行了比较.
参考文献
| [1] | 何忠治.电工钢[M].北京:冶金工业出版社,1996 |
| [2] | Helmut P .Nondestructure rapid investigation of domainsand grain boundaries of grain oriented silicon steel[J].ISIJ International,1989,29(10):828. |
| [3] | Tadav Nozawa et al.Relationship Between Total Losses Under Tensile Stress in 3-Percent Si-Fe Single Crystals and Their Orientations Near (110) 《001 》[J].IEEE Transactions on Magnetics,1978,14(04):252. |
| [4] | SHILLING J W et al.Orientation Dependence of Domain Wall Spacing and Losses in 3-Percent Si-Fe Single Crystals[J].IEEE Transactions on Magnetics,1978,14(03):104. |
| [5] | Hotaka Homma;Bevis Hutchinson;Takeshi Kubota .The production mechanism of extensively sharp Goss orientation in HI-B material[J].Journal of Magnetism and Magnetic Materials,2003(0):331-333. |
| [6] | 杨觉先.金属塑性变形物理基础[M].北京:冶金工业出版社,1991 |
| [7] | 罗 阳 .定量测定晶粒取向及织构的蚀坑法[J].金属学报,1977,13(1,2):93. |
| [8] | 常铁军.材料近代分析测试方法[M].哈尔滨:哈尔滨工业大学 出版社,1999 |
| [9] | 帅师杰 等.硅钢取向度的快速测定及定量极图的绘制[J].冶金物理测试手册,1983,4:51. |
| [10] | 杨平.电子背散射衍射技术及其应用[M].北京:冶金工业出版社,2007 |
| [11] | Munetsugu MATSUO.Texture Control in the Production of Grain Oriented Silicon Steels[J].ISIJ International,1989(29):809. |
| [12] | M.Frommert et al.Texture measurement of grain-oriented electrical steel after secondary recrystallization[J].Journal of Magnetism and Magnetic Materials,22008,320:57. |
| [13] | 方建锋,田志凌,秦英,李军,张晋远,郑毅.取向硅钢[001]晶向分布的非对称X射线衍射法测定[J].钢铁研究学报,2008(05):48-51. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%