The rods that were shaped from nanocrystalline WC- 10.21 Co- 0.42 VC/ Cr3 C2 ( wt % ) composite powders by using powder extrusion molding (PEM) were investigated.The nanocrystalline WC- 10.21 Co0.42 VC/ Cr3 C2 ( wt% ) composite powders were prepared by the spray thermal decomposition-continuous reduction and carburization technology.In order to improve the properties of rods shaped by using powder extrusion molding, the cold isostatic pressing (CIP) technology was used before or after debinding.Specimens were sintered by vacuum sintering and hot isostatic pressing (HIP).The density, Rockwell A hardness, magnetic coercivity , and magnetic saturation induction of sintered specimen were measured.The microstructure of the green bodies and the sintered specimens was studied by scanning electron microscopy (SEM).Results show that the rod formed by us ing powder extrusion molding after debinding and followed by cold isostatie pressing can be sintered to 99.5% density of composite cemented carbide rods with an average grain size of about 200- 300 nm, magnetic coercivity of 30.4 KA /m, Rockwell A hardness of 92.6 and magnetic saturation induction of 85%.Superfine WC- 10 Cocemented carbide rods with excellent properties were obtained.
参考文献
| [1] | Erik Lassner;Wolf-Dieter Schubert.Tungsten-Properties,Chemistry,Technology of the Element,Alloys,and Chemical Compounds[M].London:Kluwer Academic/Plenum Publishers,2000:1-10. |
| [2] | G. Gille;B. Szesny;K. Dreyer .Submicron and ultrafine grained hardmetals for microdrills and metal cutting inserts[J].International Journal of Refractory Metals & Hard Materials,2002(1):3-22. |
| [3] | Cao Li-hong;Shi Dong-xia;Ouyang Shi-xi et al.Study on Preparation of Ceramic Matrix Composite of WC-Co Ultrafine Powders[J].Journal of Wuhan University of Technology (Materials Science Edition),1995,10(02):40-46. |
| [4] | Zhou Jian;Cheng Jiping;Mei Bingchu .Research on microwave sintering alumina ceramics[J].Journal of Wuhan University of Technology.Materials Science edition,1998(3):34-38. |
| [5] | Parasiris A.;Hartwig K.T. .Consolidation of advanced WC-Co powders[J].International Journal of Refractory Metals & Hard Materials,2000(1):23-31. |
| [6] | El-Eskandarany M Sherif;Mahday Amir A;Ahmed H A et al.Synthesis and Characterizations of Ball-milled Nanoerystalline WC and Nanocomposite WC-Co Powders and Subsequent Consolidations[J].Journal of Alloys and Compounds,2000,312(1-2):315-325. |
| [7] | K Rodiger;H van den Berg;K Dreyer et al.Near-net-shaping in the Hardmetal Industry[J].International Journal of Refractory Metals and Hard Materials,2002,18(2-3):111-120. |
| [8] | Baojun Zhu;Xuanhui Qu;Ying Tao .Powder Injection Molding of WC-8% Co Tungsten Cemented Carbide[J].International Journal of Refractory Metals and Hard Materials,2002,20(5-6):389-394. |
| [9] | Yang Mujen;German Randall M .Nanophase and Superfine Cemented Carbides Processed by Powder Injection Molding[J].International Journal of Refractory Metals and Hard Materials,1998,16(02):107-117. |
| [10] | 张丽英,郭志猛,林涛,李汶霞,吴成义,吴庆华.纳米硬质合金粉的桥接团粒对粉末成形影响[J].北京科技大学学报,2002(02):103-106. |
| [11] | 刘小磐,赵修建,武七德,郭兵健,徐学文.成型工艺对PBRBSC素坯及烧结体性能的影响[J].武汉理工大学学报,2003(03):20-22. |
| [12] | G Q Shao;X L Duan;B L Wu;J P Singh,N P Bansal E Ustundag.Continuous Reduction Carburisation Mechanism of Precursor-Derived Nanocrystalline WC-Co.Advances in Ceramic Matrix Composites Ⅵ[M].The American Ceramic Society:Ohio,USA,2000:207-217. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%