The microstructures after various ageing treatments and their relation to the strength,fracture toughness,and corrosion behavior of an Al-Zn-Mg-Cu alloy pre-stretched plate were investigated.The results show that retrogression and reaging (RRA) treatment led to a combination of high strength and stress corrosion cracking (SCC) resistance of the alloy.The TEM microstructure of the RRA-treated alloy is a distribution of very fine precipitates in the aluminum matrix grains,similar to that obtained under T6 condition,and the distribution of coarse η MgZn2 precipitates on the grain boundaries similar to that obtained by T7 temper.SEM observations revealed that most of the intergranular fracture characteristics were present on the fracture surface of both the T6 and RRA-treated specimens.On the contrary,the fractographs of the T7 treated specimens mainly consisted of dimple-type ductile transgranular fracture with minor intergranular cracking.
参考文献
| [1] | Gang S;Alfred C .Early-stage precipitation in Al-Zn-Mg-Cu Alloys(7050)[J].Acta Materialia,2004,52:4503. |
| [2] | Warren A.S.Developments and challenges for aluminum-A Boeing perspective[A].Australia,2004:24. |
| [3] | Dumont D.;Deschamps A.;Brechet Y. .On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):326-336. |
| [4] | Heinz A;Haszler A;Keidel C;Moldenhauer S Benedictus R and Miller W.S .Recent development in aluminium alloys for aerospace applications[J].Materials Science and Engineering A,2000,280:102. |
| [5] | Cvijovic Z;Vratnica M;Rakin M .Micromechanical modelling of fracture toughness in overaged 7000 alloy forgings[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2006,434:339. |
| [6] | Lukasak D.A;Hart R.M .Strong aluminum alloy shaves aircraft weight[J].Adv Mater Processes,1991,140(04):46. |
| [7] | Cina B;Ranish B .Reducing the Susceptibility of Alloy,Particular Aluminum Alloys to Stress Corrosion Cracking[P].U.S.Patent,3856584,1974. |
| [8] | Tanaka M;Hénon C;Warner T .Microstructural evolution of a new aerospace 7ⅩⅩⅩ alloy during retrogression and re-ageing treatment[J].Materials Science Forum,2006,519-521:345. |
| [9] | Danh N.C;Rajan K;Wallece W .Mierostructural study of a high-strength stress-retrogression and reageing in 7075 aluminum[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1983,14:1843. |
| [10] | Park J.K;Ardell A.J .Effect of retrogression and reaging treatments on the microstructure of Al 7075-T651[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1984,15(08):1531. |
| [11] | Li Z.H;Xiong B.Q;Zhang Y.A;Zhu B.H Liu H.W and Wang F .Effect of two-step ageing treatment on microstructure and properties of 7B04 alloy pre-stretched thick plates[J].Rare Met,2007,26(03):19. |
| [12] | Li Z.H;Xiong B.Q;Zhang Y.A;Zhu B.H Liu H.W and Wang F .Ageing behavior of an Al-Zn-Mg-Cu alloy pre-stretehed thick plate[J].Journal of University of Science and Technology Beijing,2007,14(03):246. |
| [13] | Liu Y.L;Hu Z.Q;Zhang Y et al.Influence of retrogression and reaging on microstructure and properties of 8090 Al-Li alloy[J].aterials Science and Technology,1993,9(08):672. |
| [14] | Salazar-Guapuriche M.A;Zhao Y.Y;Pitman A;Greene A .Correlation of strength with hardness and electrical conductivity for aluminium Alloy 7010[J].Mater Sci Forum,2006,519-521:853. |
| [15] | Denzer D.K;Chakrabarti D.J;Liu J et al.Method for Increasing the Strength and/or Corrosion Resistance of 7000 Series Al Aerospace Alloy Products[P].U.S.Patent,20030051784,2003. |
| [16] | Tsai T.C;Chuang T.H .Role of grain size on the stress corrosion cracking of 7475 aluminum alloys[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,1997,225:135. |
| [17] | Najjar D;Magnin T;Warner T.J .Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy[J].Mater Sci Eng A,1997,238:293. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%