在采用传统内固化工艺对厚壁壳体成型时,内层温度往往不足以满足其固化要求或者加热时间过长,因此通常采用多次缠绕多次固化的成型工艺,耗能高、效率低,不但大大提高了成本,也难以保证产品质量.因此本文提出了内外协同固化新工艺并介绍其原理,建立纤维树脂复合材料厚壁壳体内外协同固化过程的传热模型和固化动力学模型,通过有限元软件ANSYS和APDL语言开发内外协同固化过程数值模拟程序,实现了厚壁壳体内外协同固化过程中温度和固化度的分布及其变化规律的数值模拟研究.对新工艺的数值模拟结果表明,随着外温和预热温度的不断增大,中心节点的温度、固化度和应变波动较大;厚壁壳体内外协同固化的时间很短,是传统固化时间的1/3.
参考文献
| [1] | Design of filament-wound isotensoid pressure vessels with unequal polar openings[J].Composite structures,2010(9):2307. |
| [2] | Lei Zu .Stability of fiber trajectories for winding toroidal pressure vessels[J].Composite structures,2012(5):1855-1860. |
| [3] | Jiazhong Xu;Xinying Wang;Ming Qiao .The Numerical Simulation Research of Internal Curing Process for Fiber Winding Composite Shell[J].Polymers & Polymer Composites,2011(4/5):319-326. |
| [4] | JZ Xu;M Qiao;B You .Research on heated-mandrel winding process for resin-matrix composite shells[J].Journal of Reinforced Plastics and Composites,2012(9):605-620. |
| [5] | Xu J Z;Qiao M;You B et al.Simulation and optimization of mandrel-heating process for composite shells using internal heat-curing method[J].Journal of Reinforced Plastics and Composites,2012,31(03):133-143. |
| [6] | Jonghyun Kim;Tess J. Moon;John R. Howell .Transient Thermal Modeling of In-Situ Curing During Tape Winding of Composite Cylinders[J].Journal of heat transfer: Transactions of the ASME,2003(1):137-146. |
| [7] | Luca Sorrentino;Luca Tersigni .A Method for Cure Process Design of Thick Composite Components Manufactured by Closed Die Technology[J].Applied composite materials,2012(1):31-45. |
| [8] | Abdel-Hady F .Filament winding of revolution structures[J].Journal of Reinforced Plastics and Composites,2005(8):855-868. |
| [9] | KIM C;White S R .Continuous curing and induced thermal stresses of a thick filament wound composite cylinder[J].Journal of Reinforced Plastics and Composites,2001,20:166. |
| [10] | Costa ML;Botelho EC;Rezende MC .Monitoring of cure kinetic prepreg and cure cycle modeling[J].Journal of Materials Science,2006(13):4349-4356. |
| [11] | XlANGQIAO YAN .Finite Element Simulation of Cure of Thick Composite:Formulations and Validation Verification[J].Journal of Reinforced Plastics and Composites,2008(4):339-355. |
| [12] | 寇哲君,戴棣,曹正华.复合材料结构固化变形预测[J].材料工程,2007(z1):225-228. |
| [13] | 李辰砂,冷劲松,王殿富,杜善义,李晓峰,刘志强,陈君.纤维缠绕圆筒复合材料固化成型过程机理模型（上）[J].纤维复合材料,2000(04):19-25,28. |
| [14] | Kim Y K;White S R.Viscoelastic analysis of processing-induced residual stresses in thick composite laminates[J].MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES,1997(04):361-387. |
| [15] | Vincenza Antonucci;Michele Giordano;Kuang-Ting Hsiao;Suresh G. Advani .A methodology to reduce thermal gradients due to the exothermic reactions in composites processing[J].International Journal of Heat and Mass Transfer,2002(8):1675-1684. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%