以宝钢1 550 mm UCMW冷连轧机为研究平台,针对目前国际上的一种主流机型--UCMw冷轧机型存在的技术问题,从改善带钢板形控制性能和降低轧辊辊耗的角度出发,提出了改进方案.即包括兼顾均匀辊间接触压力与解耦思想的中间辊辊形技术和可改善边降控制性能的工作辊辊形技术,提升了机组的板形控制性能,一定程度上完善了此UCMW冷连轧机组的机型.生产试用表明,改进后的新机型能有效控制硅钢产品的边降和平坦度并使之全部达到控制目标,取得了预期的应用效果.
1 550 mm tandem cold mill in Baosteel was used as the study platform. This paper focused on the improve-ment of control capability of strip flatness and reduction of roll consumption in UCMW cold tandem mill which is an international mainstream mill type. It is proposed that intermediate roll profile technology which gives consideration this UCMW tandem cold mill was improved to some extent. Edge drop and stripe flatness of silicon steel was im-proved after the modification, control objective had been realized, and good effect had been brought about in applica-tion.
参考文献
| [1] | 吴平 .五机架UCMW冷连轧机边降自动控制系统(AEC)研究[D].北京:北京科技大学,2003. |
| [2] | 陈先霖 .新一代高技术薄带冷轧机的发展趋向[J].上海金属,1995,17(05):1. |
| [3] | 徐乐江.板带冷连轧机板形控制与机型选择[M].北京:冶金工业出版社,2007:205. |
| [4] | 何安瑞,张清东,杨荃,许健勇,姜正连,汪晨.现代化冷连轧机的最佳机型配置[J].钢铁,2004(05):43-46. |
| [5] | 陈先霖.宽带钢冷连轧机的机型设计问题[C].2005中国钢铁年会论文集,2005:511-514. |
| [6] | 戚向东,连家创,李山青.新建冷带连轧机机型选择和配置方案研究[J].重型机械,2005(01):1-4. |
| [7] | 许健勇.关于带钢冷轧机选型的探讨[J].钢铁,2008(05):1-6. |
| [8] | Yarita I;Kitahama M;Hiruta T.Transverse Thickness Profile Control in Hot and Cold Strip Rolling by Tapered-Crown Work Roll Shifting (K-WRS) Mill[J].SEAISI Quarterly,1998(07):26. |
| [9] | 张清东,李博.UCMW冷连轧机组各架中间辊端部辊形[J].北京科技大学学报,2009(02):240-243. |
| [10] | 白剑,张清东,阙月海,李有元,许健勇.冷连轧DI材基板的边部板形控制[C].2007年中国钢铁年会,2007 |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%