为了探讨辐照对尼龙6(PA6)基共混材料吸水性能和力学性能的影响,制备了PA6和聚四氟乙烯(PTFE)共混合金并在室温下进行不同剂量的60Coγ射线辐照.通过吸水率测试、准静态拉伸和弯曲实验以及缺口冲击测试,研究了辐照对PA6/PTFE共混体系吸水性能以及吸收水和辐照剂量对共混合金动静态力学性能的影响.结果表明,辐照过程引发交联反应,共混合金的拉伸强度、拉伸模量和弯曲模量均随辐照剂量的增大而增大,而缺口冲击强度和吸水率则随之减小.吸收水对共混合金缺口冲击强度的影响与合金组分有关.PTFE含量较低时,吸收水抑制PTFE对合金冲击强度的减弱作用;当PTFE的质量分数大干7%时,吸收水反而加剧PTFE对材料冲击强度的减弱效应.此外,PA6/PTFE合金的吸水率随PTFE含量的增加而降低,而弯曲模量则先增后减.
参考文献
| [1] | Ajit Singh .Irradiation of polymer blends containing a polyolefin[J].Radiation Physics and Chemistry,2001(4/5):453-459. |
| [2] | S.C.Tjong;Y.Z.Meng .Structural-mechanical relationship of epoxy compatibilized polyamide 6/polycarbonate blends[J].Materials Research Bulletin: An International Journal Reporting Research on Crystal Growth and Materials Preparation and Characterization,2004(11):1791-1801. |
| [3] | 张新颖,谢建军,敬波.酯交换反应对PET/PA6共混体系性能的影响[J].中国塑料,2004(05):19-22. |
| [4] | Asa Hallden;Mehrnoush Jowkar Deriss;Bengt Wesslen .Morphology of LDPE/PA-6 blends compatibilised with poly(ethylene-graft-ethylene oxide)s[J].Polymer: The International Journal for the Science and Technology of Polymers,2001(21):8743-8751. |
| [5] | 杨明山.尼龙6与改性PP的共混研究[J].高分子材料科学与工程,1996(03):85-89. |
| [6] | S.Lopez-Quintana;C.Rosales;I.Gobernado-Mitre;J.C.Merino;J.M.Pastor .Effect of beta-irradiation on mechanical properties of metallocene elastomers/PA6 blends[J].Polymer: The International Journal for the Science and Technology of Polymers,2004(23):8041-8050. |
| [7] | Evstatiev M.;Petrovich S.;Georgiev G.;Fakirov S. Friedrich K.;Schultz JM. .In situ polymer/polymer composites from poly(ethylene terephthalate), polyamide-6, and polyamide-66 blends[J].Journal of Applied Polymer Science,1998(4):723-737. |
| [8] | 杜玲 .PA6/PTFE聚合物合金性能及相容性的研究[D].武汉理工大学,2003. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%