欢迎登录材料期刊网

材料期刊网

高级检索

对椭圆管椭圆翅片间的流动与传热规律进行了三维数值研究,分析了不同翅片间距、迎面风速对表面换热系数和流动阻力的影响;与具有相同结构参数(相同的基管当量直径和翅片厚度、表面积)的圆管圆翅片进行比较表明,在相同条件下,两者的表面换热系数相差不大,但椭圆管椭圆翅片间流动阻力却有明显的减小.场协同分析表明,翅片迎风侧的换热要优于背风侧;通过适当增加迎风侧翅片面积,减小背风侧翅片面积,可以在强化换热的同时,减小流动阻力.

A three-dimensional numerical simulation was carried out to study the flow and heat transfer characters outside the elliptical finned elliptical tube.The influence of fin parameters and inlet flow velocity on heat transfer coefficient and flowed friction was researched.With comparison of the circular finned circular tube which has the identical structure parameters(equivalent diameter,thickness of fin and the surface area),in the identical condition,the heat transfer coefficients of elliptical tube and circular tube nearly are less different,but the flowed friction of elliptical tube reduced obviously.With the theory of field synergy.it was found that the local heat transfer on the fin located on the windward side is better than that on the leeward side.With the fin area increasing on the windward side and reducing that on the 1eeward side properly,the heat transfer could be enhanced,and at the same time,the flowed friction could be reduced.

参考文献

[1] 宋富强,屈治国,何雅玲,陶文铨.低速下空气横掠翅片管换热规律的数值研究[J].西安交通大学学报,2002(09):899-902.
[2] 陈磊,苑中显.翅片管式冷凝器3D对流换热的数值模拟[C].2007年传热传质学学术会议论文集,2007:131-134.
[3] 杨立军,周健,杜小泽,刘登瀛,杨勇平.扁平管外蛇形翅片空间的流动换热性能数值模拟[J].工程热物理学报,2007(01):122-124.
[4] 姬长发,傅明星,王美,邱泓.管翅换热器换热与流动的三维定常特性分析[J].西安科技大学学报,2007(02):182-186.
[5] 李启良,赵兰萍.矩形翅片椭圆管热交换器流动和换热特性的数值模拟[J].流体机械,2006(08):67-70.
[6] 过增元;黄素逸.场协同原理与强化传热新技术[M].北京:中国电力出版社,2004
[7] Guo ZY.;Wang BX.;Li DY. .A novel concept for convective heat transfer enhancement[J].International Journal of Heat and Mass Transfer,1998(14):2221-2225.
[8] Tao W Q;He Y L;Liu X.A Unified Theory for Enhancing Single Transport Process-Field Synergy[A].Kasuga:Institute of Advanced Material Study,Kyushu University,2001
[9] 周俊杰,陶文铨,王定标.场协同原理评价指标的定性分析和定量探讨[J].郑州大学学报(工学版),2006(02):45-47.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%