目前,鲜见有关对AZ31镁合金采用搅拌摩擦加工改善其微观形貌进而提高其耐蚀性能的报道.采用电化学测试仪、光学显微镜、扫描电镜及分析天平研究了AZ31镁合金搅拌摩擦加工前后在3.5%NaCl溶液中的腐蚀行为.结果表明:在含Cl-溶液中,与原材AZ31相比,加工后的AZ31自腐蚀电位较高,自腐蚀电流密度较小,阻抗较大,且腐蚀失重速率较小,两者的腐蚀机制均为点蚀,加工后的AZ31点蚀程度较轻,形成了细小的等轴晶及第二相的固溶,提高了其耐蚀性能.
参考文献
[1] | 王快社,王文,郭韡,王文礼,武佳蕾.搅拌摩擦加工铸态AZ31镁合金组织与性能研究[J].稀有金属材料与工程,2010(07):1275-1278. |
[2] | Zeng R;Chen J;Dietzel W et al.Corrosion of friction stir welded magnesium alloy AM50[J].Corrosion Science,2009,51(08):1738-1746. |
[3] | 张大童,熊峰,张卫文,邱诚,张文.搅拌摩擦加工AZ31镁合金的超塑性[J].中国有色金属学报(英文版),2011(09):1911-1916. |
[4] | Woo W;Choo H;Brown DW;Liaw PK;Feng Z .Texture variation and its influence on the tensile behavior of a friction-stir processed magnesium alloy[J].Scripta materialia,2006(11):1859-1864. |
[5] | Renlong Xin;Bo Li;Ling Li;Qing Liu .Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5 wt.% NaCl[J].Materials & design,2011(8/9):4548-4552. |
[6] | Tao Zhang;Ying Li;Fuhui Wang .Roles of β phase in the corrosion process of AZ91D magnesium alloy[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2006(5):1249-1264. |
[7] | ZENG Rong-chang,ZHANG jin,HUANG Wei-jiu,W. DIETZEL,K. U. KAINER,C. BLAWERT,KE Wei.Review of studies on corrosion of magnesium alloys[J].中国有色金属学会会刊(英文版),2006(z1):763-771. |
[8] | 颜爱娟,朱雪梅,滕颖丽,邢志强,周权.AZ31镁合金微弧氧化膜的电化学腐蚀性能[J].大连交通大学学报,2008(03):45-48. |
[9] | Guang-Ling Song;ZhenQing Xu .The surface, microstructure and corrosion of magnesium alloy AZ31 sheet[J].Electrochimica Acta,2010(13):4148-4161. |
[10] | A. DHANAPAL,S. RAJENDRA BOOPATHY,V. BALASUBRAMANIAN.AZ61A镁合金搅拌摩擦焊接头在NaCl溶液中的腐蚀行为[J].中国有色金属学报(英文版),2012(04):793-802. |
[11] | Aung N N;Zhou W .Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy[J].Corrosion Science,2010,52(02):589-594. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%