为克服乘波体方法设计Bump型面灵活性不足的问题,发展出一套可适用于三维非结构网格的渗透边界反问题设计方法.融合渗透边界和运动边界的处理方法,应用扩展的流线追踪技术将渗透边界的反问题设计技术扩展到三维非结构网格.在激波面上将渗透速度与激波切向速度组合成“虚拟渗透速度”,通过追踪该速度获得修正后的激波面形状.在24325的网格量下得到最终的Bump型面及其激波形状只需3 min左右,与正圆锥流场截取的Bump型面相比误差为1.5％左右.通过数值计算表明渗透边界的反问题方法设计的Bump型面可以有效地排除前体低能流.从而为Bump型面的设计提供了一个新的方法.
To overcome the problem of insufficient flexibility in waverider method on Bump surface design,This paper develops a permeable boundary inverse method which can be used on threedimensional unstructured grid.The method composited the treatment of permeable boundary and moving boundary methods,and utilized extension streamline tracing technique which could expand the application field to three-dimensional unstructured grids.The shape of shock wave surface was calculated out by tracing ‘virtual penetrating velocity’ which was combined by permeable velocity and tangential velocity on shock surface.The calculation for ultimate bump surface and shock wave shape on girds with 24325 elements just needed 3 minutes,and the relative error just about 1.5％ comparing with accurate cone fiowfield.The numerical simulation showed that the Bump surface which design by permeable inverse design method could efficiently remove the forebody low-kinetic energy flow.Thus it can provide a new method for bump surface design.
参考文献
| [1] | 杨应凯,李玉璞.JSF X-35的一绝--无附面层隔道超音速进气道[J].国际航空,2001(08):13-15. |
| [2] | T. Bui-Thanh;M. Damodaran;K. Willcox .Aerodynamic Data Reconstruction and Inverse Design Using Proper Orthogonal Decomposition[J].AIAA journal,2004(8):1505-1516. |
| [3] | Jameson A.;Pierce NA.;Martinelli L. .Optimum aerodynamic design using the Navier-Stokes equations[J].Theoretical and Computational Fluid Dynamics,1998(1/4):213-237. |
| [4] | A. Demeulenaere;R. Van den Braembussche .Three-dimensional inverse method for turbomachinery blading design[J].Journal of turbomachinery,1998(2):247-255. |
| [5] | L. de Vito;R. A. Van den Braembussche;H. Deconinck .A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading[J].Journal of turbomachinery,2003(2):310-316. |
| [6] | Allen, CB .Parallel universal approach to mesh motion and application to rotors in forward flight[J].International Journal for Numerical Methods in Engineering,2007(10):2126-2149. |
| [7] | Rendall TCS;Allen CB .Unified fluid-structure interpolation and mesh motion using radial basis functions[J].International Journal for Numerical Methods in Engineering,2008(10):1519-1559. |
| [8] | 吴晴,钟易成,胡骏,余少志.基于激波拟合与柔性壁的反设计数值方法研究[J].空气动力学学报,2009(02):234-239,245. |
| [9] | Renato Paciorri;Aldo Bonfiglioli .A shock-fitting technique for 2D unstructured grids[J].Computers & Fluids,2009(3):715-726. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%