研究了CSP热轧低碳SPHC钢的微观组织、第二相粒子的析出及其对强度的影响,对马钢CSP生产的SPHC钢和常规热轧工艺的SPHC钢进行了屈服强度比较.结果表明,马钢SPHC钢的实测值比计算值高42MPa,常规工艺生产的SPHC钢实测值与计算值比较接近.对马钢SPHC钢进行透射电镜观察,观察到其中存在纳米级的、亚微米级的和微米级的3种尺寸级别的第二相粒子,马钢SPHC钢沉淀强化的强度增量为40 MPa.
参考文献
| [1] | 柳得橹,王元立,霍向东,陈南京,邵伟然,傅杰,康永林.CSP低碳钢的晶粒细化与强韧化[J].金属学报,2002(06):647-651. |
| [2] | Zambrano P C;Guerrero M P;Colas R et al.Microstructural Analysis of Hot-Rolled,Low-Carbon Steel Strips[J].Materials Characterization,2004,47:275-282. |
| [3] | 翁宇庆.超细晶钢-钢的组织细化理论与控制技术[M].北京:冶金工业出版社,2003 |
| [4] | LIU De-lu;FU Jie;KANG Yong lin .Oxide and Sulfide Dispersive Precipitation and Effects on Microstructure and Properties of Low Carbon Steel[J].Journal of Materials Science and Technology,2002,18(01):7-9. |
| [5] | 雍歧龙;马鸣图;吴宝榕.微合金钢-物理和力学冶金[M].北京:机械工业出版社,1989 |
| [6] | KANG Yong-lin;YU Hao;FU Jie .Morphology and Precipita tion Kinetics of AIN in Hot Strip of Low Carbon Steel Produced by Compact Strip Production[J].Materials Science and Engineering,2003,A351:265-271. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%