探索了离子聚合物金属复合材料(IPMC)的制备工艺,利用化学沉积的方法成功制备了铂型IPMC(Pt-IPMC)试样.采用SEM对试样表面电极形貌进行研究,对Pt-IPMC试样在4种波形激励信号(幅值2～4 V,频率0.06～0.14 Hz)下的致动位移进行了测试.结果表明:金属Pt在离子交换膜内部及外表面具有良好的沉积效果,内、外电极厚度均有不同程度的减小;随着激励信号幅值的增加,IPMC试样的变形能力增强,响应速度加快;在4种波形信号的激励下,试样均在频率为0.1 Hz时达到最大位移,且在方波信号驱动下具有最好的响应速度和变形量.
参考文献
| [1] | Shahinpoor M,Kim K J.Novel ionic polymer-metal composites equipped with physically loaded particulate electrodes as biomimetic sensors,actuators and artificial muscles[J].Sensor and Actuators,2002,96:125-132. |
| [2] | Jeon J H,Yeom S W,Oh I K.Fabrication and actuation of ionic polymer metal composites patterned by combining electroplating with electroless plating[J].Composites Part A:Applied Science and Manufacturing,2008,39:588-596. |
| [3] | Shahinpoor M,Kim K J.Ionic polymer-metal composites I:Fundamentals[J].Smart Materials and Structures,2001,10:819-833. |
| [4] | Shahinpoor M.Recent advances in ionic polymer conductor composite materials as distributed nanosensors,nanoactuators and artificial muscles[C]//Yoseph Bar-Cohen.Smart Materials and Structures.EAPAD.USA:SPIE,2005,5759:49-63. |
| [5] | Mojarrad M,Shahinpoor M.Biomimetic robotic propulsion using polymeric artificial Muscles[C]// International Conference on Robotics and Automation.Albuquerque,NM,USA:IEEE Computer Society Press,1997:2152-2157. |
| [6] | Jung S H,Song J,Kim G.Effects of the electrode interface on the electric properties of IPMC for artificial muscles[J].IFMBE Proceedings,2007,14(17):2973-2976. |
| [7] | Sadeghipour K,Salomon R,Neogi S.Development of a novel electrochemically active membrane and smart material based vibration sensor/damper[J].Smart Materials and Structures,1992,1(2):172-179. |
| [8] | 安逸,熊克,顾娜.采用梯度功能方法的IPMC弹性模量改进模型[J].复合材料学报,2009,26(6):189-193.An Yi,Xiong Ke,Gu Na.Improved model of IPMC's elastic modulus using functionally gradient method[J].Acta Materiae Compositae Sinica,2009,26(6):189-193. |
| [9] | Shahinpoor M.Conceptual design,kinematics and dynamics of swimming robotic structures using ionic polymeric gel muscles[J].Smart Materials and Structures,1992,1(1):91-94. |
| [10] | Lee S J,Han M J,Kim S J.A new fabrication method for IPMC actuators and application to artificial fingers[J].Smart Materials and Structures,2006,15(5):1217-1224. |
| [11] | Sia N N,Wu Y X.Comparative experimental study of ionic polymer-metal composites with different backbone ionomers and in various cation forms[J].Journal of Applied Physics,2003,93(9):5255-5266. |
| [12] | 金宁,王帮峰,卞侃,陈骐,熊克.表面粗化工艺对IPMC的制备及性能影响[J].功能材料,2008,39(11):1933-1936.Jin Ning,Wang Bangfeng,Bian Kan,Chen Qi,Xiong Ke.Effect of surface roughening on the manufacture and performance of IPMC[J].Journal of Functional Materials,2008,39(11):1933-1936. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%