为了提高AA6063铝合金的性能,采用激光熔覆技术在AA6063铝合金表面制备了TiC增强Al3Ti复合涂层,研究了激光熔覆层的成分、显微形貌和耐腐蚀性能.结果表明:激光熔覆层由树枝晶Al3Ti、枝晶间α-Al和均匀分布的TiC颗粒组成,涂层和基材为良好的冶金结合;与基材相比,激光熔覆层的耐腐蚀性能显著提高,且随着TiC含量的增加,熔覆层的耐腐蚀性能提高.
参考文献
| [1] | Katipelli LR.;Dahotre NB.;Agarwal A. .Laser surface engineered TiC coating on 6061 Al alloy: microstructure and wear[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2000(2/3):65-78. |
| [2] | 张松,张春华,张录廷,文効忠,吴维弢,王茂才.铝合金表面激光熔覆SiC颗粒增强表层金属基复合材料的组织及空泡腐蚀性能[J].材料工程,2002(02):47-插2. |
| [3] | Ghosh K;McCay M H;Dahotre N B .Formation of a wear resistant surface on Al by laser aided in-situ synthesis of MoSi2[J].Journal of Materials Processing Technology,1999,88:169-179. |
| [4] | Man HC;Yang YQ;Lee WB .Laser induced reaction-synthesis of TiC+WC reinforced metal matrix composites coatings on Al 6061[J].Surface & Coatings Technology,2004(1):74-80. |
| [5] | Tomida S.;Saji S.;Kubo T.;Nakata K. .Formation of metal matrix composite layer on aluminum alloy with TiC-Cu powder by laser surface alloying process[J].Surface & Coatings Technology,2001(0):585-589. |
| [6] | I.B. Singh;D.P. Mandal;M. Singh;S. Das .Influence Of Sic Particles Addition On The Corrosion Behavior Of 2014 Al-cu Alloy In 3.5% Nacl Solution[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2009(2):234-241. |
| [7] | K. Uenishi;K.F. Kobayashi .Formation of surface layer based on Al3Ti on aluminum by laser cladding and its compatibility with ceramics[J].Intermetallics,1999(5):553-559. |
| [8] | Chong PH.;Man HC.;Yue TM. .Laser fabrication of Mo-TiC MMC on AA6061 aluminum alloy surface[J].Surface & Coatings Technology,2002(2/3):268-275. |
| [9] | Man H C;Kwok C T;Yue T M .Cavitation erosion and corresion behaviour of laser surface alloyed MMC of SiC and Si3N4 on Al alloy AA6061[J].Surface and Coatings Technology,2000,132:11-20. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%