对比研究了环氧5228A树脂及碳纤维/环氧5228A树脂复合材料层合板在3种湿热环境(水煮、70℃水浸,70℃85%相对湿度)下的湿热性能,考察了湿热条件对复合材料层间剪切性能的影响规律,并从吸湿特性、物理化学特性、树脂力学性能、湿应力等方面分析了不同湿热环境下复合材料性能衰减的机制.研究表明,碳纤维/高温固化环氧树脂复合材料层问剪切性能主要是Eh吸湿率决定,相同吸湿率不同湿热条件下性能的下降幅度基本相同;3种湿热条件下该树脂及其复合材料未发生化学反应、微裂纹等不可逆变化,复合材料层合板湿热老化机制主要是吸入水分后基体增塑和树脂、纤维湿应变不一致导致的湿应力对复合材料性能的负面作用.
参考文献
[1] | 王莉莉,杨小平,于运花,王成忠.湿热环境对抽油杆CF/VE拉挤复合材料的影响[J].复合材料学报,2004,21(3):131-136.Wang Lili,Yang Xiaoping,Yu Yunhua,Wang Chengzhong.Effects of environments on pultruded carbon fiber/vinyl ester resin composite[J].Acta Materiae Compositae Sinica,2004,21(3):131-136. |
[2] | Ray B C.Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites[J].Journal of Colloid and Interface Science,2006,298:111-117. |
[3] | 吕小军,张琦,许俊华,等.湿热处理对碳纤维/环氧树脂基复合材料力学性能影响研究[J].材料工程,2005(11):50-54.Lv Xiaojun,Zhang Qi,Xu Junhua,et al.Study of hydrothermal aging effect on mechanical properties of carbon fiber/epoxy resin composites[J].Material Engineering,2005 (11):50-54. |
[4] | Bao L R,Yee A F.Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fiber composites,Part Ⅰ:Uniweave composites[J].Composites Science and Technology,2002,62:2099-2110. |
[5] | 李敏,张宝艳.改性双马树脂/碳纤维复合材料体系耐湿热性能研究_J].热固性树脂,2006,21(5):25-27.Li Min,Zhang Baoyan.Study on the hydrothermal properties of a modified bismaleimide resin/carbon fiber composite[J].Thermosetting Resin,2006,21(5):25-27. |
[6] | 王京城,阳晓辉.T300/QY9512复合材料的耐湿热性能[J].纤维复合材料,2004,6(2):22-25.Wang Jingcheng,Yang Xiaohui.Hygrothermal roperties of T300/QY9512 Composites[J].Fiber Composites,2004,6 (2):22-25. |
[7] | 过梅丽,肇研.航空航天结构复合材料湿热老化机理的研究[J].宇航材料工艺,2002(4):51-54.Guo Meili,Zhao Yah.Study on hygrothermal ageing mechanisms of aerospace structural composites[J].Aerospace Materials & Technology,2002(4):51-54. |
[8] | 周春华,刘威,张志谦.CF/PMR-15复合材料界面的湿热稳定性研究[J].复合材料学报,1997,14(4):132-137.Zhou Chunhua,Liu Wei,Zhang Zhiqin.Study of moisture stability of CF/PMR 15 matrix interface[J].Acta Materiae Compositae Sinica,1997,14(4):132-137. |
[9] | Adams R D,Singh M M.The dynamic properties of fiber reinforced polymers exposed to hot,wet conditions[J].Composites Science and Technology,1996,56:977-997. |
[10] | Paplham W P,Brown R A,Salin I M,Seferis J C.Absorption of water in polyimide resins and composites[J].Journal of Applied Polymer Science,1995,57:133-137. |
[11] | 过梅丽,肇研.先进聚合物基复合材料的老化研究[J].宇航材料工艺,2000,21(增刊1):62-65.Guo Meili,Zhao Yan.Study of ageing of advanced polymer matrix composites[J].Acta Aeronautiea et Astronautica Sinica,2000,21(S1):62-65. |
[12] | Vistasp M K,Xian G J.Hygrothermal effects on high Vf pultruded unidirectional carbon/epoxy composites:Moisture uptake[J].Composites Part B:Engineering,2009,40(1):41-49. |
[13] | 过梅丽,阳芳,范欣愉,等.聚合物基复合材料的湿扩散参数研究[J].复合材料学报,2001,18(1):34-37.Guo Meili,Yang Fang,Fan Xinyu,et al.Moisture diffusion parameters of polymer matrix composites[J].Acta Materiae Compositae Sinica,2001,18 (1):34-37. |
[14] | 刘建华.赵亮,李松梅.盐雾环境对玻璃纤维增强树脂基复合材料力学性能的影响[J].复合材料学报,2007,24(3):18-22.Liu Jianhua,Zhao Liang,Li Songmei.Effect of salt spray on mechanical properties of glass fiber reinforced polymer composites[J].Acta Materiae Compositae Sinica,2007,24 (3),18-22. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%