研究了快淬工艺对无钴AB5型LaxMm1-x(NiMnSiAlFe)4.9(x=0,0.45,0.75,1.0)合金微观结构及电化学循环稳定性的影响.结果表明:快淬处理显著改善合金的成分均匀性,使晶粒细化,并显著提高合金的循环稳定性.当淬速从0m/s增加到28 m/s时,经300次充放循环后,x=0.45合金的容量衰减率D从0.28 mAh/g·c-1(c代表一次循环)下降到0.13mAh/g·c-1;x=1.0合金的容量衰减率D从0.3mAh/g·c-1下降到0.14mAh/g·c-1.
参考文献
| [1] | Uehara I et al.[J].Journal of Alloys and Compounds,1997,253-254:635. |
| [2] | Wang Q D et al.[J].Journal of Alloys and Compounds,1997,253-254:629. |
| [3] | Ping Li;Xin-Lin Wang;Yang-Huan Zhang .Research of low-Co AB_5 type rare-earth-based hydrogen storage alloy electrodes[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):310-314. |
| [4] | Ping Li et al.[J].Journal of Power Sources,2003,124:285. |
| [5] | Cocciantelli J M et al.[J].Journal of Alloys and Compounds,1997,253-254:642. |
| [6] | WeKang Hu et al.[J].Journal of Alloys and Compounds,1998,269:254. |
| [7] | WeiKang Hu et al.[J].Journal of Alloys and Compounds,1998,268:261. |
| [8] | WeiKang Hu .[J].Journal of Alloys and Compounds,1999,289:299. |
| [9] | Lijun Jiang et al.[J].Journal of Alloys and Compounds,1995,231:635. |
| [10] | Daniel Chartouni et al.[J].Journal of Alloys and Compounds,1996,241:160. |
| [11] | Tetsuo Sakai et al.[J].Journal of the Less-Common Metals,1990,161:193. |
| [12] | 张羊换,陈梅艳,王新林,王国清,祁焱,郭世海.硼对低钴AB5型贮氢合金循环寿命的影响[J].稀有金属材料与工程,2005(02):212-216. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%