开发了利用非均匀有理B样条对叶轮机械三维叶片进行参数化重构的叶片造型模块和提供多种优化方法的优化模块;集成上述模块以及自主开发的网格生成软件和流场求解软件,建立了压气机气动数值优化平台.在该平台上对某5级轴流压气机末级静子进行了气动数值优化设计,取得了良好的优化效果,压气机性能得到有效提高.
A blade parameterization module specially for 3-D turbomachinery blades using NURBS and an optimization module with several different optimization methods are developed.The numerical optimization platform for aerodynamics design of compressors is thus constructed by assembling together the blade reconstruction module,the optimization module,an in-house grid generator,and an in-house CFD solver.The platform is then applied to a aerodynamic optimization of a last stator in a 5-stage axial compressor.The improvement of the compressor performance is obtained due to the optimization.
参考文献
| [1] | J. D. Denton;L.Xu .The exploitation of three-dimensional flow in turbomachinery design[J].Proceedings of the Institution of Mechanical Engineers, Part C. Journal of mechanical engineering science,1999(C2):125-138. |
| [2] | Gallimore S J;Bolger J J;Cumpsty N A et al.The Use of Sweep and Dihedral in Multistage Axial Flow Compressor Blading-Part I:University Research and Methods Devel-opment[ASME Paper 2002-GT-30328][R].,2002. |
| [3] | Gallimore S J;Bolger J J;Cumpsty N A .The Use of Sweep and Dihedral in Multistage Axial Flow Compres-sor Blading-Part Ⅱ:Low and High-Speed Designs and Test Verification[ASME Paper 2002-GT-30329][R].,2002. |
| [4] | 宁方飞 .考虑真实几何复杂性的跨音压气机内部流动的数值模拟[D].北京航空航天大学,2002. |
| [5] | Ning F F;XU L P .Numerical Investigation of Transonic Compressor Rotor Flow Using an Implicit 3D Flow Solver with One-Equation Spalart-Allmaras Turbulence Model[ASME Paper 2001-GT-0359][R].,2001. |
| [6] | 宁方飞,刘晓嘉.一种新的响应面模型及其在轴流压气机叶型气动优化中的应用[J].航空学报,2007(04):813-820. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%