运用有限元方法计算了梯度功能陶瓷刀具ＦＧ－２内的热应力，计算结果表明，在高速切削条件下，梯度功能陶瓷刀具内的热应力明显小于普通陶瓷刀具；同时进行的切削实验也表明在高速切削的条件下，ＦＧ－２的破损寿命明显好于ＳＧ－４．说明梯度功能陶瓷刀具适应于高速切削．
The thermal stresses in a functionally graded ceramic tool were calculated by using the finite element method. Results show that the thermal stresses in the functionally graded ceramic tool are smaller than in the common ceramic tools in high cutting speed conditions, which was confirmed by the cutting experiment. This phenomenon indicates that functionally graded ceramic tools are more suitable for high- speed cutting than conventional cutting tools.
参考文献
| [1] | 艾兴，萧虹. 陶瓷刀具切削加工. 北京: 机械工业出版社, 1988. [2] Ai Xing, Zhao Jun, Zhang Jianhua, et al. Mater．Sci. Eng?．A， 1998, 248 (1-2): 125--131. [3] 赵军，艾兴, 张建华, 等(Zhao Jun, { et al)．硅酸盐学报(Journal of the Chinese Ceramic Society) 1998, 26 (3): 292--299. [4] 赵军，艾兴，张建华, 等．机械工程学报，1998, 34 (4): 69--73. [5] 刘鸿文．材料力学(第二版)上册．北京:高等教育出版社，1982. [6] 樊宁. 梯度功能陶瓷刀具的应力设计及切削性能研究. 硕士?学位论文. 济南: 山东工业大学, 1998. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%