利用波浪形倾斜板振动技术制备AZ31镁合金半固态坯料,获得较为理想的球形或近球形晶粒组织.结果表明:随二次加热温度的升高和保温时间的延长,半固态组织中的液相体积分数增大,固相逐渐长大并球化；AZ31镁合金580℃和610℃时二次加热组织均不适合半固态触变成形;适合触变成形的二次加热最优工艺为590℃保温40～60 min、或者600℃保温30 min；此条件下获得的平均晶粒直径为58～61 μm,固相率为87％(体积分数)左右.晶格扩散机制对二次加热原子扩散起主导作用,是造成合金固相颗粒尺寸变化的根本原因;固液界面张力是造成颗粒形状球形或近球形变化的重要原因.
参考文献
| [1] | H. V. Atkinson .Modelling the semisolid processing of metallic alloys[J].Progress in materials science,2005(3):341-412. |
| [2] | 罗守靖,田文彤,谢水生,毛卫民.半固态加工技术及应用[J].中国有色金属学报,2000(06):765. |
| [3] | FLEMINGS M C .Behavior of metal alloys in the semisolid state[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1991,22(05):957-981. |
| [4] | KIRKWOOD D H .Semisolid metal processing[J].International Materials Reviews,1994,39(05):173-189. |
| [5] | GUAN Ren-guo;CAO Fu-rong;CHEN Li-qing;LI Jian-ping WANG Chao .Dynamical solidification behaviors and microstructure evolution during vibrating wavelike sloping plate process[J].Journal of Materials Processing Technology,2009,209(05):2592-2601. |
| [6] | Moradi, M.;Nili-Ahmadabadi, M.;Poorganji, B.;Heidarian, B.;Parsa, M.H.;Furuhara, T. .Recrystallization behavior of ECAPed A356 alloy at semi-solid reheating temperature[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(16/17):4113-4121. |
| [7] | R.K. Seo;C.G.Kang .The effect of raw material fabrication process on microstructural characteristics in reheating process for semi-solid forming[J].Journal of Materials Processing Technology,2005(0):402-409. |
| [8] | WANG Shun-cheng,LI Yuan-yuan,CHEN Wei-ping,ZHENG Xiao-ping.Microstructure evolution of semi-solid 2024 alloy during two-step reheating process[J].中国有色金属学会会刊（英文版）,2008(04):784-788. |
| [9] | Dong J.;Cui JZ.;Le QC.;Lu GM. .Liquidus semi-continuous casting, reheating and thixoforming of a wrought aluminum alloy 7075[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):234-242. |
| [10] | ZHAO Zu-de,CHENG Yuan-sheng,CHEN Qiang,WANG Yan-bin,SHU Da-yu.Reheating and thixoforging of ZK60+RE alloy deformed by ECAE[J].中国有色金属学报（英文版）,2010(02):178-182. |
| [11] | 杨红亮,张质良,I.Ohnaka,H.Yasuda,A.Sugiyama,T.Ohmichi.ZL101合金半固态二次加热[J].中国有色金属学报,2003(03):626-630. |
| [12] | 马春梅,王开坤,张鹏,徐峰.双层金属管用半固态坯料制备及二次加热[J].特种铸造及有色合金,2009(08):721-724. |
| [13] | 张奎;张永忠;刘国均;徐骏 张景新 樊建中 .半固态AlSi7Mg合金二次加热工艺与组织转变机制[J].金属学报,1999,35(02):127-130. |
| [14] | Nami, B.;Shabestari, S.G.;Razavi, H.;Mirdamadi, S.;Miresmaeili, S.M. .Effect of Ca, RE elements and semi-solid processing on the microstructure and creep properties of AZ91 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(3):1261-1267. |
| [15] | S. Ji;K. Roberts;Z. Fan .Isothermal coarsening of fine and spherical particles in semisolid slurry of Mg-9Al-1Zn alloy under low shear[J].Scripta materialia,2006(11):971-974. |
| [16] | 胡汉起.金属凝固原理[M].北京:冶金工业出版社,2000 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%