针对SP轧制过程,通过有限元模拟和现场测试认为,框架内部间隙、轧制负荷是引起模块振动、衬板受力不均和侧压不同步的主要原因,分析了轧制板坯头部和中间部位时板坯的变形规律和侧压模块的受力,给出了轧制狗骨的产生机理.同时定量模拟了当模块的垂直度出现偏差时产生向下分力的大小,这是加剧衬板损坏的一个原因.通过与实测结果的比较,证明建立模型的正确性和计算结果的可靠性.
参考文献
[1] | 熊尚武,吕程,刘相华,王国栋."狗骨"材平轧的三维刚塑性有限元分析[J].钢铁研究学报,2000(01):14-17. |
[2] | SUN Benrong;SHUAI Min;YANG Xinfa .Investigation on Basic Technological Parameter of Edging Rolling on Hot Wide Strip Mill[J].Iron and Steel,1995,30(10):37-41. |
[3] | XIONG Shangwu;LIU Xianghua;WANG Guodong et al.Simu-lation of Vertical-horizontal Rolling Process During Width Reduction by Full Three-dimensional Rigid-plastic Finite Element Method[J].Journal of Materials Engineering and Performance,1997,6(06):757-765. |
[4] | JIAO Sihai;ZHOU Xu;LIU Xianghua .Effect of Sizing Pressing on Slab Deformation[J].Iron and Steel,1999,34(12):34-37. |
[5] | WANG Zhaodong;WANG Guodong;LI Hui et al.Slab Sizing Press-new Development of Heavy width Reduction in Hot Strip Mill[J].Shanghai Metals,1993,15(02):11-15. |
[6] | Hideyuki Nikaido .Development of Slab Sizing Press for Heavy Width Reduction in Hot Strip Mills[J].Iron and Steel Engineers,1990,9:21-26. |
[7] | Muller H A;Rohde W .Behaviour of Slabs Under Deformation in a Sizing Press With Large Width Reductions[J].MPT,1992,15(05):60-69. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%