采用粉末冶金法在较高的温度下制备了SiC,Si_3N_4和Al_(18)B_4O_(33)晶须增强Al-8.5Fe-1.3V-1.7Si耐热铝合金复合材料,山于采用不含Mg的基体避免了Al_(18)B_4O_(33)晶须界面上出现界面反应和Si_3N_4,SiC晶须界面上出现的界面生成物,所以所有晶须界面都是清洁的.加入晶须可以明显提高材料的强度和模量,三种晶须的增强效果依次为SiC,Si_3N_4和Al_(18)B_4O_(33).这类复合材料的强度随温度的升高呈线性下降,其使用温度可比SiC_w/2024Al复合材料提高50-100℃
Various whiskers, SiC, Si_3N_4 and Al_(18)B_4O_(33),reinforced Al-8.SFe1 .3V-1 .7Si alloy composites have been prepared by the P / M technique at elevated temperature. The interfacial reaction at the Al_(18)B_4O_(33) interfaces and interfacial reaction product at the SiC or Si_3N_4 interfaces were avoided by employing the alloy matrix without Mg. The strength and modulus of the composites may be obviously improved by incorporating the whiskers in effective sequence:SiC, Si_3N_4 and Al_(18)B_4O_(33). The strength of thess compositeswill linearly drop with increasing temperature, yet their service temperature seems to be 50-100 ℃ higher than that of SiCw / 2024Al composite.
参考文献
[1] | |
[2] | |
[3] | |
[4] | |
[5] | |
[6] | |
[7] | |
[8] | |
[9] | SuganumaK,FujitaT,NiiharaK,SuzukiN.JMaterSciLett,1989 |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%