通过数值模拟方法研究了圆管内湍流气体和压力旋流雾化喷嘴产生的液滴群的掺混规律.定义了掺混度、不均匀浓度因子和无量纲颗粒浓度定量评价掺混水平,根据这些特征参数,获得了掺混度曲线和截面等浓度线.分析了不同水气比、喷嘴雾化角度和颗粒直径情况下颗粒群对横向气流的影响以及气相对颗粒群掺混过程的作用.结果表明:颗粒群的加入使气相产生了尺度不同的涡,促进了气相湍流发展;近喷雾区,大尺度的涡造成了颗粒局部浓度较高,掺混度较低,但是经过较短的距离就能充分掺混,此时掺混度值较高,同时初始的喷雾形态和壁面处的较大速度梯度使得颗粒存在趋壁现象;水气比1:1、中等雾化角度90°和较大的颗粒更有利于掺混.
参考文献
| [1] | Drew D A .Mathematical Modeling of Two-Phase Flow[J].Annual Review of Fluid Mechanics,1983,15(01):261-291. |
| [2] | Crowe C T;Troutt T R;Chung J N .Numerical Models for Two-phase Turbulent Flows[J].Annual Review of Fluid Mechanics,1996,28:11-43. |
| [3] | Sirignano W A .Fluid Dynamics of Sprays[J].Journal of Fluids Engineering,1993,115(02):345-378. |
| [4] | Sergei S. Sazhin .Advanced models of fuel droplet heating and evaporation[J].Progress in energy and combustion science,2006(2):162-214. |
| [5] | 黄群星,马增益,池涌,岑可法.循环流化床内局部颗粒昆合特性的研究[J].动力工程,2004(01):13-17. |
| [6] | 田凤国,章明川,齐永锋,顾明言,张健,范浩杰.流化床轴径向混合特性的数值研究[J].中国电机工程学报,2006(21):119-124. |
| [7] | 罗坤,樊建人,岑可法.气固两相流动中颗粒扩散的转捩现象[J].科学通报,2006(23):2810-2817. |
| [8] | 陶文铨.数值传热学[M].西安:西安交通大学出版社,2005:1-5. |
| [9] | Sommerfeld M. .Analysis of isothermal and evaporating turbulent sprays by phase-Doppler anemometry and numerical calculations[J].International journal of heat and fluid flow,1998(2):173-186. |
| [10] | O'Rourke P J .Statistical Properties and Numerical Implementation of a Model for Droplet Dispersion in Turbulent Gas[J].J.Comput.Physics,1989,83(02):345-360. |
| [11] | O'Rourke P J;Amsden A A .The Tab Method for Numerical Calculation of Spray Droplet Breakup[SAE paper 872089][R].,1987. |
| [12] | Bai C;Gosman A D .Development of Methodology for Spray Impingement Simulation[SAE paper 950283][R].,1995. |
| [13] | Crowe C T;Sommerfeld M;Tsuji Y.Multiphase Flows with Droplets and Particles[M].New York:CRC Press,1998 |
| [14] | 缪万波,夏智勋,胡建新,赵建民,罗振兵.金属/水反应冲压发动机内流场数值模拟[J].推进技术,2007(02):186-189. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%