利用光学显微镜(OM)、热场发射(FSEM)和XRD等分析手段研究不同含Cu量富铁Al-Si富镍相的演变,结果表明,随着Cu含量的增加,合金主要高温耐热相由粗大块状或汉字状(T-Al9FeNi相+β-Al5FeSi相)转变为(δ-Al3CuFeNi相+γ-Al7Cu4Ni相)网状组织,进而演变为半环形的(δ-Al3CuFeNi相+θ-Al2Cui相)；OM观察发现α-Al相由粗短枝晶逐渐转变为发达长轴晶,进一步演变为均匀分布的二次枝晶,由此促使合金中合金相由粗大聚集状逐渐演变为环状或半环状析出.
参考文献
| [1] | Haque M M;Sharif A .Study on wear properties of aluminium-silicon piston alloy[J].Journal of Materials Processing Technology,2011,118:69-73. |
| [2] | Belov NA;Eskin DG;Avxentieva NN .Constituent phase diagrams of the Al-Cu-Fe-Mg-Ni-Si system and their application to the analysis of aluminium piston alloys[J].Acta materialia,2005(17):4709-4722. |
| [3] | Xiangfa Liu;Jinguo Qiao;Yuying Wu .EPMA analysis of calcium-rich compounds in near eutectic Al-Si alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2005(1):83-90. |
| [4] | M. R. Joyce;C. M. Styles;P. A. S. Reed .Elevated temperature short crack fatigue behaviour in near eutectic Al-Si alloys[J].International Journal of Fatigue,2003(9/11):863-869. |
| [5] | Qian Z;Liu X F;Zhao D G et al.Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al-Si piston alloy[J].Materials Letters,2008,62:2146-2149. |
| [6] | Saccone A;Cacciamani G;Maccio D.Contribution to the study of the alloys and intermetallic compounds of aluminium with the rare-earth metals[J].Intermetallics,1998(06):201-215. |
| [7] | Yunguo Li;Yuying Wu;Zhao Qian;Xiangfa Liu .Effect of co-addition of RE, Fe and Mn on the microstructure and performance ofA390 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2009(1/2):146-149. |
| [8] | M. M. Haque;M. A. Maleque .Effect of process variables on structure and properties of aluminium-silicon piston alloy[J].Journal of Materials Processing Technology,1998(1/3):122-128. |
| [9] | Three-dimensional visualization and characterization of morphology and internal microstructural features of primary silicon crystals in a cast Al-Si base alloy[J].Journal of Crystal Growth,2009(19):4454. |
| [10] | Chen C L;Richter A;Thomson R C .Mechanical properties of intermetallics phases in multi-component Al-Si alloys using nanoindentation[J].Intermetallics,2009,17:634-641. |
| [11] | Mondolfo L F.Aluminium Alloys:Structure and Properties[M].London:Butter-worth;Bdijing,1976 |
| [12] | Zhang J S.High temperature deformation and fraction of Materials[M].北京:科学出版社,2010 |
| [13] | Bonsack W .Discussion on the effect of minor alloying elements on Al casting alloys[J].ASTM Bulleton,1949,117(08):45-59. |
| [14] | Couture A.Iron in Al casting alloys-Aliterature survey AFS inter[J].Cast Metals,1981(12):74-80. |
| [15] | Grand L .Influence of some inpurities on the quality of Al alloys[J].Founderie,1964,217(03):95-100. |
| [16] | Narayanan L A.Crystallization behavior of iron-containing intermetallic compounds in 391 aluminium alloy[J].Metallurgical and Materials Transactions,1994(08):1761-1773. |
| [17] | Gowri S;Samuel F H .Effect of alloying elements on solidification characteristic and microstrucyure of Al-Si-Cu-Mg-Fe 380 alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25:437-448. |
| [18] | Gustafsson G;Thorvaldsson T;Dunlop G L .The influence of Fe and Cr on the microstructures of cast Al-Si-Mg alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1985,17(01):45-52. |
| [19] | Belov N A;Eskin D G;Avxentieva N N.Multicomponent Phase Diagrams:Applications for Commercial Aluminum Alloys[M].Oxford:Elsevier,2005 |
| [20] | Chen C L;Thomson R C.The combined use of EBSD and EDX analyses for the identification of complex intermetallic phases in multicomponent Al-Si piston alloys[J].Journal of Alloys and Compounds,2008 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%