以大颗粒碳化硅(SiC)为陶瓷骨料,采用凝胶注模法制备支撑体生坯,原位反应烧结制备大孔径、高渗透性的多孔SiC陶瓷支撑体,主要考察了有机单体含量和烧结制度对高温气固分离用陶瓷膜支撑体性能的影响.研究结果表明:适宜的有机单体含量有助于SiC颗粒稳定分散在悬浮液中,提高烧结温度和延长保温时间均可增加SiC颗粒的氧化程度,在1 550℃时,XRD图谱显示莫来石相生成,支撑体的抗弯强度有一定程度的提高.采用凝胶注模法制备的生坯在1 550℃,保温4h烧结后具有良好的性能:抗弯强度为20.4 MPa,孔隙率为37％,平均孔径为23 μm,气体渗透率为2.01×10-12 m2.
参考文献
| [1] | 任祥军,程正勇,刘杏芹,彭定坤,孟广耀.陶瓷膜用于气固分离的研究现状和前景[J].膜科学与技术,2005(02):65-68,90. |
| [2] | Pastila P;Helanti V;Nikkila A et al.Environmental effects on microstructure and strength of SiC-based hot gas filters[J].Journal of the European Ceramic Society,2001,21(09):1261-1268. |
| [3] | 徐南平;邢卫红;赵宜江.无机膜分离技术与应用[M].北京:化学工业出版社,2003 |
| [4] | 李俊峰,林红,李建保.碳化硅多孔陶瓷气孔率和强度影响因素[J].无机材料学报,2011(09):944-948. |
| [5] | 刘有智,石国亮,郭雨,张红宇.新型多孔碳化硅陶瓷膜管的制备与性能表征[J].膜科学与技术,2007(01):32-34,40. |
| [6] | Toshihiro Isobe;Asami Ooyama;Mai Shimizu .Pore size control of Al_2O_3 ceramics using two-step sintering[J].CERAMICS INTERNATIONAL,2012(1):787-793. |
| [7] | 张锐,高濂,程国峰,郭景坤.注浆成型SiC多孔陶瓷的工艺和性能研究[J].无机材料学报,2002(04):725-730. |
| [8] | Zhou Y;Fukushima M;Miyazaki H et al.Preparation and characterization of tubular porous silicon carbide membrane supports[J].Journal of Membrane Science,2011,369(1-2):112-118. |
| [9] | JAI KOO PARK;JUNG SHICK LEE;SEUNG IN LEE .Preparation of Porous Cordierite Using Gelcasting Method and its Feasibility as a Filter[J].Journal of porous materials,2002(3):203-210. |
| [10] | Yi Z Z;Xie Z P;Huang Y et al.Study on gelcasting and properties of recrystallized silicon carbide[J].Ceramics International,2002,28(04):369-376. |
| [11] | Ornatete O O;Janney M A;Strehlow R A et al.Gelcasting-a new ceramic forming process[J].AMERICAN CERAMIC SOCIETY BULLETIN,1991,7(10):1641-1649. |
| [12] | Young A C;Omatete O O;Janney M A et al.Gelcasting of alumina[J].Journal of the American Ceramic Society,1991,74(03):612618. |
| [13] | Gilissen R;Erauw J P;Smolders A et al.Gelcasting,a near net shape technique[J].Materials and Design,2000,21(04):251-257. |
| [14] | L.J. Vandeperre;A.M. De Wilde;J. Luyten .Gelatin gelcasting of ceramic components[J].Journal of Materials Processing Technology,2003(2/3):312-316. |
| [15] | Jinlong Yang;Juanli Yu;Yong Huang .Recent developments in gelcasting of ceramics[J].Journal of the European Ceramic Society,2011(14):2569-2591. |
| [16] | 沈云进 .氧化铝/碳化硅陶瓷复合膜的制备与性能考察[D].南京:南京工业大学,2012. |
| [17] | Zhang T;Zhang ZQ;Zhang JX;Jiang DL;Lin QL .Preparation of SiC ceramics by aqueous gelcasting and pressureless sintering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):257-261. |
| [18] | Shuqiang Ding;Yu-Ping Zeng;Dongliang Jiang .In-situ reaction bonding of porous SiC ceramics[J].Materials Characterization,2008(2):140-143. |
| [19] | Kumar M;Eom J H;Kim Y W et al.Effect of aluminum hydroxide content on porosity and strength of porous mullite-bonded silicon carbide ceramics[J].Journal of the Ceramic Society of Japan,2011,119(05):367-370. |
| [20] | 董应超 .新型低成本多孔陶瓷分离膜的制备与性能研究[D].中国科学技术大学,2008. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%