参考文献
| [1] | Haitao LIU;Zhenyu LIU;Guodong WANG .Texture development and formability of strip cast 17% Cr ferritic stainless steel[J].ISIJ International,2009(6):890-896. |
| [2] | Huh M Y;Lee J H;Park S H et al.Effect of Through-Thickness Macro and Micro Texture Gradients on Ridging of 17%Cr Ferritic Stainless Steel Sheet[J].Steel Research International,2005,76(11):797. |
| [3] | H. G. Kang;M. Y. Huh;S. H. Park .Effect of Lubrication during Hot Rolling on the Evolution of Through-Thickness Textures in 18%Cr Ferritic Stainless Steel Sheet[J].Steel Research International,2008(6):489-496. |
| [4] | Huh M Y;Kim H C;Park J J et al.Evolution of Through Thickness Texture Gradients in Various Steel Sheets[J].Metals and Materials,1999,5(05):437. |
| [5] | Juan F. Almagro;Xavier Llovet;M. Auxiliadora Heredia .Soluble fraction of stabilising elements in ferritic stainless steel[J].Mikrochimica Acta: An International Journal for Physical and Chemical Methods of Analysis,2008(3/4):323-327. |
| [6] | 张辉,王建军,刘春明.00Cr17高纯铁素体不锈钢热塑性的研究[J].材料科学与工艺,2010(03):313-316. |
| [7] | Yoshihiro Yazawa;Yoshihiro Ozaki;Yasushi Kato;Osamu Furukimi .Development of ferritic stainless steel sheets with excellent deep drawability by (111} recrystallization texture control[J].JSAE review,2003(4):483-488. |
| [8] | Yoshihiro Yazawa .Development of Ti-bearing High Performance Ferritic Stainless Steels R430XT and RSX-1[J].Kawasaki Steel Technical Report,1999(40):0-0. |
| [9] | Uematsu Y;Yamazaki Y .Effects of Hot Rolling Conditions on Hot Rolled Microstructures and Ridging Properties in 17%Chromium Ferritic Stainless Steel[J].Tetsu To Hagane-Journal of the Iron and Steel Institute of Japan,1992,78(04):632. |
| [10] | Chi Zhang;Zhenyu Liu;Guodong Wang .Effects of hot rolled shear bands on formability and surface ridging of an ultra purified 21%Cr ferritic stainless steel[J].Journal of Materials Processing Technology,2011(6):1051-1059. |
| [11] | Huh M Y;Engler O .Effect of Intermediate Annealing on Texture,Formability and Ridging of 17%Cr Ferritic Stainless Steel Sheet[J].Materials Science and Engineering,2001,308(1/2):74. |
| [12] | Hiroyuki MIYAMOTO;Tong XIAO;Toshiyuki UENOYA .Effect of Simple Shear Deformation Prior to Cold Rolling on Texture and Ridging of 16% Cr Ferritic Stainless Steel Sheets[J].ISIJ International,2010(11):1653-1659. |
| [13] | Siqueira, R.P.;Sandim, H.R.Z.;Oliveira, T.R.;Raabe, D. .Composition and orientation effects on the final recrystallization texture of coarse-grained Nb-containing AISI 430 ferritic stainless steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(9):3513-3519. |
| [14] | Y. B. PARK;D. N. LEE;G. GOTTSTEIN .DEVELOPMENT OF TEXTURE INHOMOGENEITY DURING HOT ROLLING IN INTERSTITIAL FREE STEEL[J].Acta materialia,1996(8):3421-3427. |
| [15] | 刘海涛,马东旭,刘振宇,王国栋.终轧温度对超纯铁素体不锈钢组织、织构及成形性能的影响[J].钢铁研究学报,2010(08):31-35. |
| [16] | 谢胜涛,刘振宇,方园,王喆.热轧工艺对409L铁素体不锈钢深冲性的影响[J].东北大学学报（自然科学版）,2011(02):236-240. |
| [17] | Huh M Y;Cho Y S;Kim J S et al.Effect of Lubrication on the Evolution of Through-Thickness Texture Gradients in Cold Rolled and Recrystallized Low Carbon Steel[J].Zeitschrift fur Metallkunde,1999,90(02):124. |
| [18] | Ray R K;Jonas J J;Hook R E .Cold Rolling and Annealing Textures in Low Carbon and Extra Low Carbon Steels[J].International Materials Reviews,1994,39(04):129. |
| [19] | Yanhui Guo;Zhaodong Wang;Jishan Xu;Guodong Wang;Xianghua Liu .Texture Evolution in a Warm-Rolled Ti-IF Steel During Cold Rolling and Annealing[J].Journal of Materials Engineering and Performance,2009(4):378-384. |
| [20] | Zhaodong WANG,Yanhui GUO,Wenying XUE,Xianghua LIU,Guodong WANG.Effect of Coiling Temperature on the Evolution of Texture in Ferritic Rolled Ti-IF Steel[J].材料科学技术学报（英文版）,2007(03):337-341. |
| [21] | Raabe D;Lücke K .Textures of Ferritic Stainless Steel[J].Materials Science and Technology,1993,9(04):302. |
| [22] | D. Raabe;Z. Zhao;S. -J. Park .Theory of orientation gradients in plastically strained crystals[J].Acta materialia,2002(2):421-440. |
| [23] | In gaki H .Fundamental Aspect of Texture Formation in Low Carbon Steel[J].ISIJ International,1994,34(04):313. |
| [24] | Dirk VANDERSCHUEREN;Naoki YOSHINAGA;Kazuo KOYAMA .Recrystallisation of Ti IF Steel Investigated with Electron Backscattering Pattern (EBSP)[J].ISIJ International,1996(8):1046-1054. |
| [25] | Abe M;Kokabu Y;Hayashi Y et al.Effect of Grain Boundaries on the Cold Rolling and Annealing Textures of Pure Iron[J].Transactions of the Japan Institute of Metals,1982,23(11):718. |
| [26] | Emren F;Schlippenbach U V;Lücke K .Investigation of the Development of the Recrystallization Textures in Deep Drawing Steels by ODF Analysis[J].Acta Metallurgica,1986,34(11):2105. |
| [27] | Hutchinson W B .Recrystallisation Textures in Iron Resulting From Nucleation at Grain Boundaries[J].Acta Metallurgica,1989,37(04):1047. |
| [28] | Tse Y Y;Liu G L;Duggan B J .Deformation Banding and Nucleation of Recrystallisation in IF Steel[J].Scripta Materialia,2000,42(01):25. |
| [29] | Magnusson H;Jensen D J;Hutchinsson B .Growth Rates for Different Texture Components During Recrystallization of IF Steel[J].Scripta Materialia,2001,44(03):435. |
| [30] | K. Verbeken;L. Kestens;J. J. Jonas .Microtextural study of orientation change during nucleation and growth in a cold rolled ULC steel[J].Scripta materialia,2003(10):1457-1462. |
| [31] | M. Sanchez-Araiza;S. Godet;P.J. Jacques .Texture evolution during the recrystallization of a warm-rolled low-carbon steel[J].Acta materialia,2006(11):3085-3093. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%