为了提高铁铬镍合金(FeCrNi)的抗渗碳性能,在FeCrNi合金表面电镀金属Mn薄膜,然后利用低氧分压氧化法在FeCrNi合金表面制备MnO薄膜.采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和能谱仪(EDS)等研究FeCrNi合金表面MnO薄膜的组织结构、形貌、薄膜与基体界面扩散层情况及MnO薄膜的抗渗碳性能.结果表明:经低氧分压氧化法处理后,金属Mn薄膜完全氧化为MnO薄膜,且在MnO薄膜和基体之间形成扩散层,扩散层中出现了MnCr2O4尖晶石相,MnO薄膜具有明显的抗渗碳效果.
参考文献
[1] | 黄志荣;马刘宝;李培宁.HK40钢的渗铝新工艺及抗碳化腐蚀性能研究[J].材料工程,2005(1):25-28. |
[2] | 张民之;谢飞;周正华;双学壮;万一群.粉末法铝硅共渗提高耐热钢抗渗碳性能[J].热加工工艺,2007(6):44-46,49. |
[3] | 潘建伟;谢飞;孙力;焦世辉;翟建祥.耐热钢HP40Nb的中温粉末法渗铝及其抗渗碳特性[J].金属热处理,2012(1):57-60. |
[4] | B. Ganser;K. A. Wynns;A. Kurlekar.Operational experience with diffusion coatings on steam cracker tubes[J].Materials and Corrosion,199912(12):700-705. |
[5] | Jianxin Zhou;Hong Xu;Jinglei Liu.Study of anti-coking property of SiO_2/S composite coatings deposited by atmospheric pressure chemical vapor deposition[J].Materials Letters,200729(29):5087-5090. |
[6] | 董超 .低氧分压法在FeCrNi合金表面制备氧化涂层研究[D].中国石油大学(北京),2008. |
[7] | P.R. WILSON;Z. CHEN.Characterisation of Surface Grain Boundary Precipitates Formed During Annealing of Low Carbon Steel Sheets[J].Scripta materialia,20051(1):119-123. |
[8] | Mantel M..Effect of double oxide layer on metal-glass sealing[J].Journal of Non-Crystalline Solids: A Journal Devoted to Oxide, Halide, Chalcogenide and Metallic Glasses, Amorphous Semiconductors, Non-Crystalline Films, Glass-Ceramics and Glassy Composites,20001/3(1/3):294-301. |
[9] | Gordon R. Holcomb;David E. Alman.The effect of manganese additions on the reactive evaporation of chromium in Ni-Cr alloys[J].Scripta materialia,200610(10):1821-1825. |
[10] | 李处森;杨院生.金属材料在高温碳气氛中的结焦与渗碳行为[J].中国腐蚀与防护学报,2004(3):188-192. |
[11] | Carburization behaviour of Mn-Cr-O spinel in high temperature hydrocarbon cracking environment[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,200910(10):2336. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%