采用双料筒毛细管流变仪和Haul-off牵伸设备,研究了云母(Mica)/聚丙烯(PP)共混物在拉伸流场中的流变性能。结果表明:Mica/PP共混物熔体拉伸流动属于拉伸变稀型,随着云母含量的增加,熔体的表观拉伸黏度逐渐增大。熔体的拉伸应力和表观拉伸黏度均随温度的升高而下降。随着拉伸应变速率的提高,熔体的拉伸应力增大,表观拉伸黏度减小,熔体拉伸流动活化能呈下降趋势。云母微粒的加入使聚丙烯熔体的拉伸模量明显增大,但随着拉伸速度的提高,共混熔体的拉伸模量下降显著。为了提高Mica/PP共混物的纺丝稳定性,应严格控制好拉伸速度和加工温度。
The rheological behavior in extensional flow of the melt of mica/polypropylene(PP) blend was researched by twin-bore capillary rheometer and Haul-off equipment.The results show that rheological property of all the Mica/PP samples appear extensional thinning behavior,with the increase of the mica content,the apparent extensional viscosity increases.The extensional stress and the apparent extensional viscosity decline with the rise of temperature.The extensional stress increases,the apparent extensional viscosity and the activation energy of extensional flow viscosity decrease with increasing the extensional strain rate.The added mica particles make the tensile modulus of PP melt increase remarkably,but with the increase of drawing speed,the tensile modulus of the blend melt decreases significantly.In order to improve the spinning stability of Mica/PP blend,it was important to control the drawing speed and processing temperature.
参考文献
[1] | 张顺花,李慧艳,杨逢春.PET/wSPET聚酯共混物的结构与拉伸流变性能[J].纺织学报,2008,29(6):7-10. |
[2] | 李慧艳,张顺花,张显策.PET/水溶性聚酯(WSPET)的流变性能研究[J].浙江理工大学学报,2007,24(5):522-524. |
[3] | 潘明珠,张述垠,周定国.麦秸纤维增强聚丙烯复合材料的熔融流变性[J].复合材料学报,2010,27(3):99-104. |
[4] | 刘生鹏,应继儒,周兴平,解孝林.苯乙烯原位聚合改性氢氧化镁/聚丙烯复合材料的流变特性[J].复合材料学报,2009,26(5):33-38. |
[5] | Muke S, Ivanov I, Kao N, et al. Extensional rheology of polypropylene melts from the Rheotens test [J]. Journal of Non-Newtonian Fluid Mechanics, 2001, 101(1 - 3) :77-93. |
[6] | Ferec J, Heuzey M C, Perez-Gonzdlez J, et al. Investigation of the rheological properties of short glass fiber- filled polypropylene in extensional flow [J]. Rheologiea Acta,2009, 48(1): 59-72. |
[7] | 李笑喃,刘鹏波.聚丙烯熔体拉伸流变行为的研究[J].塑料工业,2007,35(3):45-47. |
[8] | 陈克权,张飚,张伟.聚对苯二甲酸丙二酯熔体拉伸流变性能研究[J].合成纤维,2004(2):4-6. |
[9] | 邵强.凉爽纤维的制备及性能测试[D].天津:天津丁业大学,2008. |
[10] | Garcia-Martinez J M A, Laguna O, Areso S, et al. A thermal and mechanical study under dynamical conditions of polypropylene/mica composites containing atactic polypropylene with succinil - fluoresceine grafted groups as interracial modifier from the matrix side [J]. Journal of Polymer Science Part B, 2000, 38(11): 1564-1574. |
[11] | Yazdani H, Morshedian J, Khonakdar H. Effect of maleated polypropylene and impact modifiers on the morphology and mechanical properties of PP/Mica composites [J]. Polymer Composites, 2006, 27(6): 614-620. |
[12] | 朱静安,刘伟.云母填充改性聚丙烯的研究[J].合成树脂及塑料,1994,11(4):23-27. |
[13] | 吴唯,钱琦,周高仁.PP/云母复合材料的增容效果及其界面结构[J].塑料工业,2000,28(6):13-15. |
[14] | 胡圣飞,彭少贤,郭文迅.PP/云母复合材料力学性能研究[J].塑料科技,2000(2):13-15 |
[15] | 周持兴.聚合物流变实验与应用[M].上海:上海交通大学出版社,2003:127. |
[16] | 沈新元.高分子材料加工原理[M].北京:中国纺织出版社,2009:82. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%