研究了两相区不同退火温度及不同配分温度的淬火和碳再分配热处理工艺对低碳硅-锰系Q&P钢的显微组织、精细结构、力学性能及残留奥氏体含量的影响.结果表明,采用两相区退火的Q&P工艺室温组织为板条马氏体、铁素体、薄膜状和块状残留奥氏体;随退火温度的升高,实验钢抗拉强度和屈服强度呈上升趋势,伸长率呈下降趋势,残留奥氏体含量先上升后下降;随配分温度的升高,实验钢抗拉强度呈下降趋势,屈服强度、伸长率和残留奥氏体含量呈上升趋势;经Q&P工艺处理后的实验钢强塑积可达28215 MPa·％.
参考文献
| [1] | David K. Matlock;Volker E. Brautigam;John G. Speer .Application of the Quenching and Partitioning (Q&P) Process to a Medium-Carbon, High-Si Microalloyed Bar Steel[J].Materials Science Forum,2003(Pt.2):1089-1094. |
| [2] | Speer J G;Streicher A M;Matlock D K.Quenching and partitioning:a fundamentally new process to create high strength TRIP sheet microstructures[A].Chicago,USA,2003:505-522. |
| [3] | Streicher A M;Speer J G;Matlock D K.Quenching and partitioning response of a Si-added TRIP sheet steel[A].Warrendale:AIST,2004:51-62. |
| [4] | Gerdemann F L H .Microstructure and hardness of steel grade 9260 heat-treated by the Quenching and Partitioning process[D].Germany:Aachen University of Technology,2004. |
| [5] | Speer JG;Edmonds DV;Rizzo FC;Matlock DK .Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation[J].Current opinion in solid state & materials science,2004(3/4):219-237. |
| [6] | M.J. Santofimia;L. Zhao;R. Petrov .Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel[J].Materials Characterization,2008(12):1758-1764. |
| [7] | 刘粤惠;刘平安.X射线衍射分析原理与应用[M].北京:化学工业出版社,2003 |
| [8] | Lason J A;Jatczak C F;Shin S W.Retained austenite and its measurement by X-ray diffraction[M].Warrendale:Society of Automotive Engineers,1980 |
| [9] | 孙鹏,李麟,符仁钰,韦习成.HSLA-TRIP钢动态拉伸性能和残余奥氏体转变[J].钢铁,2004(10):63-67. |
| [10] | Rizzo F C;Edmonds D V;Speer J G.Carbon enrichment of austenite and carbide precipitation during the quenching and partitioning process[A].Phoenix:AZ,2005:535-544. |
| [11] | D. V. Edmonds;K. He;M. K. Miller .MICROSTRUCTURAL FEATURES OF 'QUENCHING AND PARTITIONING': A NEW MARTENSITIC STEEL HEAT TREATMENT[J].Materials Science Forum,2007(Pt.5):4819-4825. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%