综合采用偏光显微镜(PLM),X射线衍射仪(XRD),扫描电子显微镜(SEM),高分辨透射电子显微镜(HRTEM)等分析方法,逐层研究了2500℃高温石墨化(HTT)处理前后双层热解炭基2D C/C复合材料的不同织构以及纤维-基体界面的变化.结果表明:HTT处理后,d002值减小,石墨化度显著提高；内层低织构热解炭的断口微观形貌与晶格条纹几乎没有变化,而外层高织构热解炭晶格条纹更加平直,尤其是发现层间裂纹密度明显增大,使得处理后的高织构热解炭在受力时,裂纹易于在层间扩展和偏转,因此可有效提高材料的韧性；同时,纤维-基体界面发生弱化也是提高材料韧性的另一机制.HTT处理前后试样的三点弯曲力学性能试验结果证实了以上机制.
参考文献
| [1] | 李贺军.炭/炭复合材料[J].新型炭材料,2001(02):79-80. |
| [2] | Golecki I .Rapid vapor-phase densification of refractory composites[J].Materials Science and Engeering R,1997,20(02):37-124. |
| [3] | X. Xiong;B.-y. Huang;J.-h. Li .Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(3):463-467. |
| [4] | Ke-Zhi Li;Xue-Tao Shen;He-Jun Li .Ablation of the carbon/carbon composite nozzle-throats in a small solid rocket motor[J].Carbon: An International Journal Sponsored by the American Carbon Society,2011(4):1208-1215. |
| [5] | 陈强,李贺军,张守阳,韩红梅,李克智.脉冲FCVI制备炭/炭复合材料的微观结构及力学性能[J].新型炭材料,2006(02):132-138. |
| [6] | 于守泉,张伟刚.热处理温度对热解炭及炭/炭复合材料力学性能的影响[J].无机材料学报,2010(03):315-320. |
| [7] | 薛辉,李贺军,侯向辉,李克智,韩红梅.压力梯度CVI工艺制备2D炭/炭复合材料的弯曲断裂行为[J].新型炭材料,2004(04):289-292. |
| [8] | B. Reznik;M. Guellali;D. Gerthsen .Microstructure and mechanical properties of carbon-carbon composites with multilayered pyrocarbon matrix[J].Materials Letters,2002(1/2):14-19. |
| [9] | Guellali M;Oberacker R;Hoffmann MJ .Influence of the matrix microstructure on the mechanical properties of CVI-infiltrated carbon fiber felts[J].Carbon: An International Journal Sponsored by the American Carbon Society,2005(9):1954-1960. |
| [10] | Guellai M;Oberacker R;Hoffmann M J .Influence of heat treatment on microstructure and properties of highly textured pyrocarbons deposited during CVD at 1 100℃ and above 2000 ℃[J].Computer Science and Technology,2008,68(05):1122-1130. |
| [11] | 苏君明,杨军,肖志超,周绍建,彭志刚,辛建国,李睿,韩媚,赵胜利,谷立民.C/C复合材料飞机刹车盘的结构与性能[J].新型炭材料,2006(01):81-89. |
| [12] | 苏君明,肖志超,刘勇琼,孟凡才,彭志刚,谷立民,李国峰,邢如鹏.飞机刹车用长寿命高摩擦特性炭/炭复合材料制备技术[J].新型炭材料,2010(05):329-334. |
| [13] | Xu GZ;Li HJ;Bai RC;Wei H;Zhai YQ .Influence of the matrix texture on the fracture behavior of 2D carbon/carbon composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):319-323. |
| [14] | 和永岗,李克智,魏建锋,郭领军,张磊磊.2D C/C复合材料微观结构与力学性能的研究[J].无机材料学报,2010(02):173-176. |
| [15] | Bourrat X;Trouvat B;Limousin G et al.Pyrocarbon anisotropy as measured by electron diffraction and polarized light[J].Journal of Materials Research,2000,15(01):92-101. |
| [16] | B. Reznik;K.J. Huttinger .On the terminology for Pyrolytic carbon[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(4):621-624. |
| [17] | 蒋建纯,黄伯云,熊翔.炭/炭复合航空刹车材料的结构完整性对摩擦系数的影响[J].新型炭材料,2003(02):111-116. |
| [18] | Bourrat X.;Fillion A.;Naslain R.;Chollon G.;Brendle M. .Regenerative laminar pyrocarbon[J].Carbon: An International Journal Sponsored by the American Carbon Society,2002(15):2931-2945. |
| [19] | Sauder C;Lamon J;Pailler R .The tensile properties of carbon matrices at temperature up to 2 200 ℃[J].CARBO,2005,43(10):2054-2065. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%