研究了超快冷方式下热轧双相钢的生产工艺,采用分段冷却方式,介绍了空冷温度、空冷保温时间、卷取温度、过钢速度等工艺参数的制定原则,结合相变理论,采用模拟计算方法,得到各个参数的参考值范围。该工艺应用于热轧现场获得良好性能的双相钢,其抗拉强度达到700MPa。
The production process of hot rolled dual phase （DP） steels with ultra fast cooling was investigated. The design rule of air cooling temperature/time, coiling temperature and rolling speed was introduced under stepped cooling mode. The reference values of each parameter was obtained using simulation calculation and based on the phase transformation theory. This process was applied on site and DP steel obtains the good properties with tensile strength of 700 MPa.
参考文献
| [1] | Panda A K;Ray P K;Ganguly R I .Effect of Thermome- chanical Treatment Parameters on Mechanical Properties of Duplex Ferrite-Martensite Structure in Dual Phase Steels[J].Materials Science and Technology,2000,16:648. |
| [2] | Wozniak J;Horeas S;Navrat V .Technological Conditions for the Production of Dual Phase Ferrite-Martensite Steel Strips by Controlled Rolling[J].ARCHIVES OF METALLURGY,1988,1(33):97. |
| [3] | 宋义全;阎振柴 .无钼热轧双相钢相变和组织的研究[J].包头钢铁学院学报,1995,14(04):74. |
| [4] | 刘相华,佘广夫,焦景民,张中平,彭良贵,王国栋.超快速冷却装置及其在新品种开发中的应用[J].钢铁,2004(08):71-74. |
| [5] | 王国栋,刘相华,孙丽钢,刘哲,刘德勤.包钢CSP"超快冷"系统及590 MPa级C-Mn低成本热轧双相钢开发[J].钢铁,2008(03):49-52. |
| [6] | 刘彦春 .C-Mn双相钢的组织形成机理研究及开发[D].东北大学,2007. |
| [7] | Militzer M;Hawbolt E B;Meadowcroft T R .Mictrostruc- tural Model for Hot Strip Rolling of High-Strength Low-Al- loy Steels[J].Metallurgical and Materials Transactions,2000,31A:1247. |
| [8] | 徐祖耀.马氏体相变与马氏体[M].北京:科学出版社,1990 |
| [9] | 徐祖耀;李麟.材料热力学[M].北京:科学出版社,2005 |
| [10] | Cai X H.Simulation der Auslaufrollgang beim Warmwalzen yon DP Staehlen[M].Aachen:Shaker Verlag,2008 |
| [11] | Bleck W.Werkstoffkunde Stahl far Studium und Praxis[M].Aachen:Verlag Mainz,2004 |
| [12] | Sinha A K.Ferrous Physical Metallurgy[M].London:But- terworths Stoneham,1989 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%