The program was developed by finite element method to calculate the temperature distribution in hot strip rolling process. The heat transfer coefficients of air cooling, water cooling and thermal resistance between work roll and strip were analyzed. A new heat generation rate model was proposed according to the influence of source current density, work frequency, air gap and distance to edge on induction heating by finite element method (FEM). The heat generation rate was considered in the thermal analysis to predict the temperature distribution in the induction heating. The influence of induction heating on the strip temperature was investigated for different slab thicknesses. The temperature difference became more and more obvious with the increase of thickness. The strip could be heated quickly by the induction heating both in surface and center because of the thermal conductivity and skin effect. The heat loss of radiation has important influence on the surface temperature. The surface temperature could be heated quickly by high frequency when the strip is thicker.
参考文献
| [1] | Yanagi K.Prediction of Strip Temperature for Hot Strip Mills[J].Transactions of the Iron and Steel Institute of Japan,1976(16):11. |
| [2] | Vladimir Panjkovic .Model for prediction of strip temperature in hot strip steel mill[J].Applied thermal engineering: Design, processes, equipment, economics,2007(14/15):2404-2414. |
| [3] | Colas R.Modelling Heat Transfer During Hot Rolling of Steel Strip[J].Modelling & Simulation in Materials Science and Engineering,1995(03):437. |
| [4] | 谢海波,徐旭东,刘相华,王国栋.层流冷却过程中带钢温度场数值模拟[J].钢铁研究学报,2005(04):33-35,50. |
| [5] | LIU Xiang-hua.Rigid Plastic FEM and Its Application in Rolling[M].北京:冶金工业出版社,1994 |
| [6] | Xiong S Wo;Liu X H;Wang G D .A Three-Dimensional Finite Element Simulation of the Vertical-Horizontal Rolling Process in the Width Reduction of Slab[J].Journal of Materials Processing Technology,2000,101(01):146. |
| [7] | Li C S;Liu X H;Wang G D .Simulation on Temperature Field of 50CrV4 Automobile Gear Bar Steel in Continuous Rolling by FEM[J].Journal of Materials Processing Technology,2002,120(01):26. |
| [8] | Xuetong Li;Minting Wang;Fengshan Du .The coupling thermal-mechanical and microstructural model for the FEM simulation of cross wedge rolling[J].Journal of Materials Processing Technology,2006(2):202-207. |
| [9] | Nicholas V R;Gerald J J.Induction Heating of Strip Solenoidal and Transverse Flux[J].Iron & Steel Engineers,1992(06):39. |
| [10] | Mei R B;Li C S;Han B.Finite Element Analysis of Slab Steel in the Process of Induction Heating[J].Materials Science Forum,2008(575):282. |
| [11] | 梅瑞斌,李长生,韩斌,刘相华.热轧板坯高温感应加热有限元分析[J].钢铁,2008(02):56-60. |
| [12] | Heung Nam Han;Jae Kon Lee;Hong Joon Kim;Young-Sool Jin .A model for deformation, temperature and phase transformation behavior of steels on run-out table in hot strip mill[J].Journal of Materials Processing Technology,2002(1/3):216-225. |
| [13] | WANG Guo-dong.The Theory and Experience of Strip Rolling[M].Beijing:Railroad Press,1990 |
| [14] | S. X. Zhou .An integrated model for hot rolling of steel strips[J].Journal of Materials Processing Technology,2003(3):338-351. |
| [15] | Ko D C;Min G S;Kim B M .Finite Element Analysis for the Semi-Solid State Forming of Aluminium Alloy Considering Induction Heating[J].Journal of Materials Processing Technology,2000,100(01):95. |
| [16] | Cajner F;Smoljan B;Landek D .Computer Simulation of Induction Hardening[J].Journal of Materials Processing Technology,2004,157(01):55. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%