An experimental-numerical method for measuring dynamic crack propagating veloc-ities under stress wave loading is established in this paper. The experiments of thethree-point bend specimen are done on the improved Hopkinson bar. Deflection ofloading point, dynamic load and instantaneous crack length ave measured, then crackpropagating velocities are calculated. Experiments on 40Cr steel show that the resultsgiven by this method have a good agreement with that obtained by the resistance frac-ture gage method. Therefore this method is feasible for measuring crack propagatingvelocities under high loading rate and will have wide application.
参考文献
| [1] | R J Weimer;H C Rogers .[Z].ASTM STP,1997,627:359. |
| [2] | W B Bradly;A S Kobayashi .[J].Experimental Mechanics,1970(10):103. |
| [3] | B Stalder;P H Begelin;N H Kausch .[J].International Journal of Fracture,1983(22):R47. |
| [4] | G Y Sha;G T Liu;F C Jiang .[J].Harbin Engineering University Journal,2000,6(06):55. |
| [5] | T Kobayashi;I Yamamaoto;M Niinome .[J].Engineering Fracture Mechanics,1986,5(05):773. |
| [6] | A Johnson;J Carls;S Y Ding;C Z Wei.Impact Dynamics[M].北京:兵器工业出版社,1987:336. |
| [7] | C Chen;Q G Cai.Engineering Cracking Dynamics[M].北京:国防工业出版社,1977:272. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%