采用三点弯曲JCO成形方法制造大型直缝焊管的技术关键是板坯每道次弯曲角的弹复控制，其成形角的精度直接制约着成形管坯的椭圆度，针对管线钢材料的特点，采用双线性硬化材料模型，基于小变形假设，建立了每道次弯曲成形及弹复计算模型，得到了对应任一凸模行程处板料中性层上任一质点卸载前后的转角和挠度数学表达式，理论和实验数据均表明，弯曲角和成形角之间非常接近线性关系，验证了理论解析的正确性。
The key of technologies for manufacturing large-diameter straight seam submerged arc weld (LSAW) pipes with three-point bending JCO forming is the controlling of springback amount of bending angle in each bending step, and the precision of the forming angle directly determines the eUipticity of the pipes. Aiming at the characteristics of pipeline steel, using the bilinear hardening material model, and base on small deformation theory,the analytical model of forming and springback prediction in each bending step is constructed. The equations for the rotation angle and bending deflection of each point in neutral surface for any punch displacements are derived. Theoretical and experimental data indicate that it very closes to linear relationship between the bending angle and forming angle.and verify that the theoretical analysis is correct.
参考文献
| [1] | Z.Z. Yang,W. Tian,Q.R. Ma,Y.L. Li,J.K. Li,J.Z. Gao,H.B. Zhang,Y.H. Yang.MECHANICAL PROPERTIES OF LONGITUDINAL SUBMERGED ARC WELDED STEEL PIPES USED FOR GAS PIPELINE OF OFFSHORE OIL[J].金属学报（英文版）,2008(02):85-93. |
| [2] | ZHAO Jun,LI Jian,QU XiaoYang,WANG Gang,SUN HongLei,MA Rui.Study on intelligent control technology for forming steel pipe of pipeline with JCO process[J].中国科学:技术科学（英文版）,2011(10):2754-2759. |
| [3] | 官英平,赵军,苏春建.宽板V形自由弯曲智能化控制过程材料参数识别及最优工艺参数预测[J].机械工程学报,2005(04):199-202. |
| [4] | 朱东波,孙琨,李涤尘,卢秉恒.板料成形回弹问题研究新进展[J].塑性工程学报,2000(01):11-17. |
| [5] | 李建,赵军,展培培,孙红磊,马瑞.板料自由弯曲成形及回弹理论解析[J].塑性工程学报,2009(04):1-6. |
| [6] | 殷璟,赵军,屈晓阳,翟瑞雪.大型管件扩径矫圆弹复分析[J].机械工程学报,2011(12):32-42. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%