本文研究了煤粉形态对于激光诱导煤粉等离子体特性的影响,以指导应用激光感生击穿光谱进行煤质测量时最佳样品形态的选择.建立了一套激光诱导击穿光谱的实验台架,对同一煤种的4个不同粒径范围的粉状样品进行激光激发与光谱分析,利用钙原子不同跃迁能级发射谱线的强度分布计算了0.3~0.5μs区间内的等离子体温度,并依据谱线Stark展宽与电子密度的关系得到了等离子体的电子密度.再对激发不同粒径煤粉样品产生的等离子体温度与电子密度进行了对比.实验证明,煤粉粒径越小,等离子体温度越高且电子密度越大,也即样品的等离子化程度越高,越有利于煤中元素的定量分析.
参考文献
[1] | 余亮英,陆继东,张娟,王忠柯,叶和清.激光感生击穿光谱及研究现状[J].激光技术,2004(01):103-107. |
[2] | Tognoni E.;Palleschi V.;Corsi M.;Cristoforetti G. .Quantitative micro-analysis by laser-induced breakdown spectroscopy: a review of the experimental approaches[J].Spectrochimica Acta, Part B. Atomic Spectroscopy,2002(7):1115-1130. |
[3] | M. Kuzuya;M. Murakami;N. Maruyama .Quantitative anaysis of ceramics by laser-induced breakdown spectroscopy[J].Spectrochimica Acta, Part B. Atomic Spectroscopy,2003(5):957-965. |
[4] | Fiona J Wallis;Bruce L Chadwick;Richard J S Morrison .Analysis of Lignite Using Laser-Induced Breakdown Spectroscopy[J].Applied Spectroscopy,2000,54(08):1231-1235. |
[5] | Doug Body;Bruce L. Chadwick .Simultaneous elemental analysis system using laser induced breakdown spectroscopy[J].Review of Scientific Instruments,2001(3):1625-1629. |
[6] | 郑贤锋,李春燕,张瑾,季学韩,凤尔银,黄时中,崔执凤.环境气体的压力和性质对LIBS信号影响的实验研究[J].原子与分子物理学报,2004(z1):285-288. |
[7] | A Ciucci;M Corsi;V Palleschi et al.New Procedure for Quantitative Elemental Analysis by Laser-Induced Plasma Spectroscopy[J].Applied Spectroscopy,1999,53:960-964. |
[8] | Stavropoulos P;Palagas C;Angelopoulos GN;Papamantellos DN;Couris S .Calibration measurements in laser-induced breakdown spectroscopy using nanosecond and picosecond lasers[J].Spectrochimica Acta, Part B. Atomic Spectroscopy,2004(12):1885-1892. |
[9] | Griem H R.Plasma Spectroscopy[M].New York:McGraw-Hill,1964:297-299. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%