以碳纤维为增强材料对具有较高孔隙率的骨水泥进行补强,利用FTIR 和SEM对碳纤维表面晶体组分和骨水泥的显微结构进行了观察和分析,并对骨水泥的力学强度进行了测试.试验结果表明,硝酸氧化处理改善了骨水泥和碳纤维之间的界面结合,碳纤维的长度和添加量都会对骨水泥的力学强度造成影响.同时,碳纤维"井"字形添加工艺也能起到增强骨水泥的作用.
In this study,the bone-cement with high porosity is strengthened by carbon fibers as reinforce materials.The crystalline composition of carbon fibers' surface and microstructure of the porous bone-cement were investigated by FTIR and SEM.And mechanical strengths were tested as well.The results indicate that Nitric acid oxidation not only enhances the infiltration and the activity of carbon fibers' surface,but also improves the interfacial bonding property,which improve the combination of interface between porous bone-cement and carbon fibers.Meanwhile,the strength tests show that both the length and the contents of carbon fiber could have effects on bone-cement mechanical strength respectively.Finally,the tic-tac structure system of carbon fibers could enhance the strength of bone cement.
参考文献
[1] | 周萘.用溶胶-凝胶法制备医疗微球的若干工艺因素[J].玻璃与搪瓷,1997(01):1. |
[2] | 周何铤,周萘,逄锦涛,黄文旵.玻璃基多孔骨水泥的制备和性能研究[J].功能材料,2006(12):1962-1965. |
[3] | 殷庆立,苏慕珍.水泥基材料强度影响因素:分析与综述[J].硅酸盐通报,1999(04):60-63. |
[4] | Wen SH.;Chung DDL. .Effect of carbon fiber grade on the electrical behavior of carbon fiber reinforced cement[J].Carbon: An International Journal Sponsored by the American Carbon Society,2001(3):369-373. |
[5] | Chung D D L .[J].Compostion Part B:Engineering,2000,31(6-7):511-526. |
[6] | D.D.L. Chung .Comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials[J].Carbon: An International Journal Sponsored by the American Carbon Society,2001(8):1119-1125. |
[7] | 吴文进,杨为中,周大利,马将,肖斌.碳纤维增强α-磷酸三钙骨水泥的研究[J].生物医学工程学杂志,2006(03):569-572. |
[8] | 戴红莲,李世普,贺建华,闫玉华.碳纤维增强alpha-TCP/TTCP骨水泥的研究[J].无机材料学报,2004(05):1025-1030. |
[9] | 王静,李慕勤,温广武.短碳纤维增强羟基磷灰石生物材料的制备与性能[J].稀有金属材料与工程,2007(z3):86-89. |
[10] | 赵萍,孙康宁,朱广楠.碳纤维增强磷酸钙骨水泥复合材料[J].硅酸盐学报,2005(01):32-35,46. |
[11] | 龚江宏.陶瓷材料断裂力学[M].北京:清华大学出版社,2001 |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%