以改善中厚板轧后冷却均匀性为目的，从高压水射流冲击换热原理出发，研究在超快速冷却条件下的改善钢板冷却均匀性方法。通过合理设计集管及其布置形式，采用上集管位置设定、水比设定以及钢板头尾速度遮蔽等措施，实现了在超快速冷却过程中钢板各个方向上的冷却均匀性。将上述措施用于在线生产，结果表明，钢板各向均匀性控制良好，长度方向95%以上的温度被控制在距离目标返红温度±25℃的范围之内。
To improve the cooling uniformity of plate during ultra fast cooling process, the jet impingement heat transfer between hot steel surface and high-pressure cooling water was investigated. In addition, the headers of ultra-fast cooling system were designed and arranged rationally. A series of measures including the setting method of the upper header and water ratio, the speed masking method for head and tail of plate were adopted to improve the cooling uniformity along the thickness and length direction of the controlled cooling plate. The measures to improve the cooling uniformity were used on-line in some factory. The results show that the controlled cooling plate have a good cooling uniformity, and more than 95% of the measured temperature deviation from the target temperature is within ±25℃.
参考文献
| [1] | |
| [2] | 王有铭,李曼云,韦光.钢材的控制轧制和控制冷却[M].北京：冶金工业出版社,1995.83-90.[2]小指军夫著, 李伏桃等译. 控制轧制?控制冷却——改善材质的轧制[M], 北京: 冶金工业出版社, 2002,6。[3]王国栋，均匀化冷却技术与板带材板形控制，上海金属。Vol.29，No 6，1-5.[4]吉原直武. 厚钢板のオンライン制御冷却时の座屈解析[J], 铁と钢, 1990, 76(6): 886-893.[5]米谷茂. 残余应力的产生和对策[M], 北京: 机械工业出版社, 1983: 210-214.[6]蔡正，王国栋，刘相华.热轧带钢在冷却过程中的内应力解析，钢铁，Vol.35(2000)，No.6，33-40.[7]王国栋．新一代TMCP的实践和工业应用举例，上海金属，2008,30（3），1-4.[8]王国栋．新一代控制轧制和控制冷却技术与创新的热轧过程，东北大学学报(自然科学版)，2009,30(7), 913-922．[9]FUJIBAYASHI Akio, OMATA Kazuo. JFE Steel’s Advanced Manufacturing Technologies for High Performance Steel Plates. JFE TECHNICAL REPORT 2005,5(5):10-15.[10]Guo R M. Heat transfer of laminar flow cooling during strip acceleration on hot strip mill runout tables[J], Iron & Steelmaker, 1993, 20(8): 49-59.[11]Zumbrunnen D A. A method and apparatus for measuring heat transfer distributions on moving and stationary plates cooled by a planar liquid jet[J], Experimental Thermal and Fluid Science, 1990, 3(2): 202-213.[12]赵镇南．传热学[M]，北京：高等教育出版社，2002，267-270． |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%