The mechanical properties of the TWIP steel subjected to impact loading at various strain rates were analyzed by the split Hopkinson pressure bar. Meanwhile the microstructure of the TWIP steel fore-and-aft dynamic deformation was oberseved and analyzed by optical microscope (OM), X-ray diffraction (XRD), and transmission electron microscope (TEM). The results show that when the TWIP steel was deformed under dynamic condition, the stress, microhardness and work hardening rate increase with the increase of strain and strain rate; there is decline of work hardening rate for adiabatic temperature rising softening. There are many pin-like deformation twins in the microstructure of the TWIP steel subjected to impact loading, and the grain size after deformation is bigger than that before; the interaction of twins with dislocation and twins with twins, especially emergence of multiple deformation twins are the main strengthening mechanisms of the TWIP steel.The nucleation mechanism of deformation twins lbe "rebound mechanism"; the incomplete deformation twins can be observed when the strain rate is low; when strain rate increases, deformation twins unite together; and deformation twins become denser because the nucleation rate increases with increasing the strain rate.
参考文献
| [1] | Grassel O.;Frommeyer G.;Meyer LW.;Kruger L. .High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application[J].International Journal of Plasticity,2000(10/11):1391-1409. |
| [2] | Odeshi A G;Al-ameeri S;Bassim M N .Effect of High Strain Rate on Plastic Deformation of a Low Alloy Steel Subjected to Ballistic Impact[J].Journal of Materials Processing Technology,2005,162-163:385. |
| [3] | XUE Q;LIAO X Z;ZHU Y T et al.Formation Mechanisms of Nanostructures in Stainless Steel During High-Strain-Rate Severe Plastic Deformation[J].Materials Science and Engineering,2005,410A-411A:252. |
| [4] | Lee Woei-Shyan;Lin Chi-Feng;Liu Tsung-Ju .Impact and Fracture Response of Sintered 316L Stainless Steel Subjected to High Strain Rate Loading[J].Materials Characterization,2007,58:363. |
| [5] | Nabil Bassim M;Panic N .High Strain Rate Effects on the Strain of Alloy Steels[J].Journal of Materials Processing Technology,1999,92-93:481. |
| [6] | Uenishi A;Teodosiu C;Nesterova E V .Microstruetural Evolution at High Strain Rates in Solution-Harden Interstitial Free Steels[J].Materials Science and Engineering,2005,400A-401A:252. |
| [7] | Ryttberg K;Knutson Wedel M;Dahlman P et al.Microstruetural Evolution During Fracture Induced by High Strain Rate Deformation of 100Cr6 Steel[J].Journal of Materials Processing Technology,2009,209:3325. |
| [8] | XIONG Rong-gang,FU Ren-yu,SU Yu,LI Qian,WEI Xi-cheng,LI Lin.Tensile Properties of TWIP Steel at High Strain Rate[J].钢铁研究学报（英文版）,2009(01):81-86,21. |
| [9] | ZHANG Fu-cheng;FU Rui-dong;QIU Liang et al.Micro-structure and Property of Nitrogen-Alloy High Manganese Austenitic Steel Under High Strain Rate Tension[J].Materials Science and Engineering,2008,492 A:255. |
| [10] | Vercammen S;Blanpin B;De Cooman B C et al.Cold Rolling Behavior of an Austenitic Fe-30Mn-3Al-3Si TWIP-Steel:the Importance of Deformation Twinning[J].Acta Materia-lia,2004,52(05):2002. |
| [11] | Allain S;Chateau J P;Dahmoun D et al.Modeling of Mechanical Twinning in a High Manganese Content Austenitic Steel[J].Materials Science and Engineering,2004,387A-389A:272. |
| [12] | Yang P;Xie Q;Meng L;Ding H;Tang Z .Dependence of deformation twinning on grain orientation in a high manganese steel[J].Scripta materialia,2006(7):629-631. |
| [13] | Barbier D;Gey N;Allain S et al.Analysis of the Tensile Behavior of a TWIP Steel Based on the Texture and Microstruc-ture Evolution[J].Materials Science and Engineering,2009,500A:196. |
| [14] | Pande C S;Rath B B;Imam M A .Effect of Annealing Twins on Hall-Petch Relation in Polycrystalline Materials[J].Materials Science and Engineering,2004,367A:171. |
| [15] | Je Doo Yoo;Kyung-Tae Park .Microband-induced plasticity in a high Mn–Al–C light steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):417-424. |
| [16] | Zhen-li Mi,Di Tang,Hai-tao Jiang,Yong-juan Dai,Shen-sheng Li.Effects of annealing temperature on the microstructure and properties of the 25Mn-3Si-3Al TWIP steel[J].矿物冶金与材料学报,2009(02):154-158. |
| [17] | Y.T. Zhu;J. Narayan;J.P. Hirth .Formation of single and multiple deformation twins in nanocrystalline fcc metals[J].Acta materialia,2009(13):3763-3770. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%