采用碳热还原法和不同的添加剂在温度为９７０～１１２０℃、压力为０．１ＭＰａ的Ｎ２条件下，在石墨电阻炉内首次制备出ＮｂＣｘ（ｘ＝０．９８）－Ｃ三维网状纤维．三维网状纤维的直径为１２～３８ｍ，网的环长为０．２２～２．２μｍ，网孔径为７０～７０１μｍ．本文详细研究了制备的工艺条件及相应的网状纤维的形貌．
By the carbothermal method and different additives, NbCx(x=0.98)--C three-dimensional netted fibers were prepared in graphite resistance furnace with 0.1 MPa/N2 ambient atmosphere attemperatures of 1070 to 1670℃. The diameters of 3-D netted fibers are 12-38μm, the circumferences are 0.22-2.2mm, the hole diameters are 70-701μm. The proccesing conditions for fabricating NbCx-C 3-D netted fibers, and relative morphology of NbCx-C netted fibers were investigated indetail.
参考文献
| [1] | Heuer A H, Fink D J, Laraia J L, et al. Science， 1992, 255: 1098--1105 2 Mann S, Ozin G A. Nature, 1996, 382: 313--318 3 Kresge C T, Leonowicz M, Roth W J, et al. Nature, 1992, 359: 710--712 4 Lin H P, Mou C Y. Science, 1996, 273: 765--768 5 Akasay I A, et al. Science, 1996, 273: 892--898 6 Schacht S, Huo Q, Voigt-Martin I G, et al. Science, 1996, 273: 768--771 7 SUN Hong-Tao, CHENG Zhi-Tao, YAO Xi. Sensors and Acuators B, 1993, 13-14: 107--110 8 Davis P J, Brinker C J, Smith D M. J. of Non-crystalline Solids, 1992, 142: 189--196 9 Smith R L, Chuang S F, Collins S D. Sensors and Actuators, 1990, A21-A23, 825--829 10 Dal B F, Hardin S G, et al. J. of Materials Science, 1993, 28: 6657--6664 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%