Research on microforming of fine-grained superplastic Zn-AI22 alloy was carried out in this paper by means of superplastic forming. With the selected material, microformability tests have been carried out with the specially developed evaluation method by using two kinds of stainless steel dies. With these dies, micro-extrusion tests have been carried out and the characteristics of microformability of the material have been clarified. Effects of processing parameters and die structure on forming have been analyzed. SEM and metallographic microscope have been used to analyze the formed specimens. Through analysis of flow lines of the formed specimen, behavior of material could be understood well.
参考文献
| [1] | M.Geiger;F.Vollertsen;R.Kals .[J].Annals of the CIRP,1996,45(01):277. |
| [2] | N Tiesler;U Engel;M Geiger.Proceedings of the 6th ICTP,Vol.Ⅱ[C].,1999:889. |
| [3] | M.Geiger;M.Kleiner;R. Eckstein;N.Tiesler and U.Engel .[J].Annals of the CIRP,2001,50(02):1. |
| [4] | Y. Saotome;H. Iwazaki .Superplastic extrusion of microgear shaft of 10 μm in module[J].Microsystem technologies,2000(4):126-129. |
| [5] | Y.Saotome;A.Inoue.Advanced Technology of Plasticity of the Fourth ICTP[M].,1993:976. |
| [6] | T.Masuzawa .[J].Annals of the CIRP,2000,49(02) |
| [7] | R Weugebauar;A Schubert;J Kadner;T Burkhardt.Proceedings of the 6th ICTP,Vol II[C].,1999:921. |
| [8] | Y.Saotome;S.Miwa;Tao Zhang;A.Inoue .[J].Journal of Materials Processing Technology,2001,113:64. |
| [9] | Y Saotome;T Hatori;T Zhang;A Inoue.[J].Materials Science and Engineering,2001:716. |
| [10] | Y.Saotome;H.Iwazaki .[J].Journal of Materials Processing Technology,2001,119:307. |
| [11] | T Otto;A Schubert;J BShm .[OL].http://www.infotech.tu-chemnitz.de/～zfm/pdf/spie2000.pdf |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%