利用fluent商业软件模拟了绝热、自然通风及强制风冷条件下，加料速度为260、300、350、400 kg/h时海绵钛反应器内部的温度场分布情况。结果表明：在绝热及自然通风条件下，随着加料速度增大，反应器内温度升高，加料速度为400 kg/h时反应器内的温度比加料速度为260 kg/h时高100℃；在强制风冷条件下，加料速度为300、350、400 kg/h时反应器内的温度与自然通风条件下加料速度为260 kg/h时的温度场相近，表明通过强制风冷可对反应器内温度进行有效控制，并且加料速度（x）与所需的风量（y）的数值关系可表示为：y＝180（x-260）＋1570。
The fluent software is applied in simulating the temperature fields in the condition of adiabatic , air cooling and forced air cooling with the feeding speeds of 260 , 300 , 350 and 400 kg/h respectively .The results show that temperature of reactor increase with the increasing feeding velocity in adiabatic and air cooling condition .There is 100℃addition between the feeding velocity of 260 and 400 kg/h.The temperature field with different feeding speeds in forced air cooling condition are simulated , and the air volume is calculated .It is found that the temperature field in condition of forced air cooling with the feeding speeds of 300 , 350 , 400 kg/h are similar with the temperature field in air cooling condition with the feeding speed of 260 kg/h.The temperature of reactor can be controlled in forced air cooling condition and the numerial relation of feeding velocity x and air volume y is y=180 ( x-260 )+1 570 .
参考文献
| [1] | 狄伟伟,刘正红,孙虎民.镁还原四氯化钛生产海绵钛过程传热分析[J].钛工业进展,2011(01):25-29. |
| [2] | FLUENT公司.FLUENT软件应用手册[M].广州:广东旅游出版社,2003 |
| [3] | 岑可法;樊建人.燃烧流体力学[M].北京:水利电力出版社,1991 |
| [4] | 李金泽.降低海绵钛钛坨上部杂质铁含量的探讨与实践[J].湖南有色金属,2011(03):28-29,70. |
| [5] | 李鸿斌.还原加料对海绵钛结构的影响及改善措施[J].钛工业进展,2002(05):39-41. |
| [6] | 蒋维钧;戴猷元;顾惠君.化工原理[M].北京:清华大学出版社,1992 |
| [7] | 陈绍波,文江宁,欧阳全胜.海绵钛反应釜内部热场变化的计算机模拟[J].湖南有色金属,2012(01):25-26,78. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%