为实现Cf/Mg复合材料异形件的近净成形,在分析金属基复合材料液态浸渗制备技术的基础上,提出了真空压力浸渗-液固挤压制备Cf/Mg复合材料新工艺,并设计了相应的成形装置.利用设计的装置开展2D碳毡增强镁基复合材料异形件的制备研究.在熔炼温度为760～ 820℃,预制体预热温度为570～ 610℃,浸渗气压0.5 MPa和挤压载荷10～30 MPa等工艺参数下,成功制备出Cf/Mg复合材料异形制件.对复合材料制件进行宏观尺寸测量及扫描电镜(SEM)观察发现,制件外形完整,与设计一致;制件内部组织致密、纤维分布均匀;预制体在制备过程中没有发生明显的变形和破坏.
参考文献
| [1] | Lehua Qi;Juntao Guan;Jian Liu;Jiming Zhou;Xinliang Wei .Wear behaviors of C_f/Mg composites fabricated by extrusion directly following vacuum pressure infiltration technique[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2013(1/2):127-133. |
| [2] | 关俊涛,齐乐华,刘健,周计明.挤压温度对真空吸渗挤压Csf/Mg复合材料制备工艺的影响[J].机械工程学报,2012(14):25-31. |
| [3] | W.G. Wang;B.L Xiao;Z.Y. Ma .Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers[J].Composites science and technology,2012(2):152-158. |
| [4] | 张萍,张永忠,尹法章,张习敏.碳纤维增强镁基复合材料的制备及微观结构分析[J].有色金属,2011(01):19-22. |
| [5] | XIONG Bowen;YU Huan;XU Zhifeng et al.Fabrication of SiC particulate reinforced AZ91D composite by vacuum-assisted pressure infiltration technology[J].Journal of Alloys & Compounds,2011,509:L279-L283. |
| [6] | 胡盛青,万绍平,刘韵妍,舒阳会,谭春林.微波烧结、真空压力浸渗制备SiCp/Al电子封装材料[J].材料科学与工艺,2012(01):78-82. |
| [7] | Suraj Rawal .Metal-Matrix Composites for Space Applications[J].JOM,2001(4):14-17. |
| [8] | Cui Yan,Wang Lifeng,Ren Jianyue.Multi-functional SiC/AI Composites for Aerospace Applications[J].中国航空学报（英文版）,2008(06):578-584. |
| [9] | Ziyang Xiu;Wenshu Yang;Guoqing Chen;Longtao Jiang;Kang Ma;Gaohui Wu .Microstructure and tensile properties of Si_3N_4p/2024Al composite fabricated by pressure infiltration method[J].Materials & design,2012(Jan.):350-355. |
| [10] | 罗守靖;陈炳光;齐丕骧.液态模锻与挤压铸造技术[M].北京:化学工业出版社,2006:412-418. |
| [11] | 程远胜,张艳英,杜之明.局部增强铝基复合材料挤压铸造一体化成形技术[J].特种铸造及有色合金,2010(03):231-233. |
| [12] | KANG C G;SEO Y H .The influence of fabrication parameters on the deformation behaviour of the preform of metal-matrix composites during the squeeze-casting processes[J].Journal of Materials Processing Technology,1996,61(03):241-249. |
| [13] | MORTENSEN A;CORNIE J A .On the infiltration of metal matrix composites[J].Metallurgical and Materials Transactions,1987,18(13):1160-1164. |
| [14] | 林晓棠,储双杰,王浩伟.金属基复合材料差压浸渗凝固装置的设计[J].中国机械工程,1996(03):53. |
| [15] | QI Lehua;SU Lizeng;ZHOU Jiming.Infiltration characteristics of liquid AZ91D alloy into short carbon fiber perform[J].Journal of Alloys and Compounds,2012(527):10-15. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%