欢迎登录材料期刊网

材料期刊网

高级检索

用挤压铸造方法制备了Mullite/Al-Cu复合材料。 用硬度测试仪、差示扫描量热仪(DSC)和透射电镜(TEM)等设备研究了铝基复合材料及其基体合金中Cu含量变化对时效硬化行为的影响, 同时还研究了增强纤维对时效相的析出序列、 析出相和位错结构的影响。 结果表明, 无论是在复合材料中还是在基体合金中, 随着Al-Cu合金中Cu含量的增加,时效硬化过程均有不同程度的加速; Mullite纤维的引入提高了Al-Cu合金的时效硬度,明显加速了Al-Cu合金的时效硬化过程, 对GP区的形成有抑制作用, 但不影响基体沉淀相的析出顺序

Short mullite fibre reinforced Al-3.45Cu, Al-4.05Cu and Al-4.45Cu composites and their base alloys were fabricated by squeeze casting. The effect of variable Cu content on the age-hardening behaviour of the composites and the base alloys, the precipitation procedure and the microstructure of dislocation and precipitates have been studied by means of hardness measurement(HB), differential scanning calorimetry(DSC)and transmission electron microscope(TEM). It is shown that the age-hardening progress is accelerated apparently whether for the composites or the base alloys with increasing the content of copper in the testing materials. The aged hardness of Al-Cu alloys is increased when synthesized with the short mullite fibres, which obviously accelerates the age-hardening progress of Al-Cu alloys and suppresses the formation of GP zones. But the sequence of precipitates has not been changed in the testing composites.

参考文献

[1] Canumalla S.;Green DJ.;Bhagat RB.;Pangborn RN.;Dynan SA. .MECHANICAL BEHAVIOR OF MULLITE FIBER REINFORCED ALUMINUM ALLOY COMPOSITES[J].Journal of Composite Materials,1995(5):653-670.
[2] 陈睿;赵 平;董 斌 et al.莫来石短纤维增强ZL109铝基复合材料的时效行为[J].中国有色金属学报,1998,8(08):181.
[3] 赵平,高升吉,沈保罗,涂铭旌.残余孔洞对莫来石短纤维/ZL109复合材料强度的影响[J].中国有色金属学报,1999(04):744-747.
[4] Kavecky S.;Sebo P. .SHORT ALUMINOSILICATE FIBRE REINFORCED ALUMINIUM[J].Journal of Materials Science,1996(3):757-764.
[5] Gupta M.;Ang SE.;Lu L. .EFFECT OF MICROSTRUCTURAL FEATURES ON THE AGEING BEHAVIOUR OF AL-CU/SIC METAL MATRIX COMPOSITES PROCESSED USING CASTING AND RHEOCASTING ROUTES[J].Journal of Materials Science,1997(5):1261-1267.
[6] Dutta B;Surappa M K .Age-hardening behaviour of Al-Cu-SiCp composites synthesized by casting route[J].Scripta Metallurgica et Materialia,1995,32:731.
[7] PARRINI L;Schaller R .AlCu-Al2O3 metal matrix composites studied by mechanical spectroscopy[J].Journal of Alloys and Compounds,1994,211-212:402.
[8] Juarez-Islas JA.;Perez R.;Su S.;Lavernia EJ.;Campillo B. .Characterization of a solid solution of Cu in Al-Cu-SiCp metal matrix composites processed by spray atomization and co-deposition[J].Journal of Materials Science,1998(1):259-263.
[9] HongSI;Gray Ⅲ G T .Microstructure and microchemistry of an Al-Zn-Mg-Cu alloy matrix-20vol.% SiC composite[J].冶金材料学报,1992,40:3299.
[10] 张茂勋;陈 晓;钱匡武 et al.Al2O3-SiO2系纤维增强ZL109合金复合材料的时效特性[J].金属学报,1997,33(08):891.
[11] 张茂勋;陈 晓;钱匡武.Al2O3-SiO2系纤维增强ZL108合金复合材料的时效特性[A].Beijing:The Aviation Association of China The Chinese Association of Astronauts,1996
[12] Clyne T W;Withers P J.An introduction to metal matrix composites[M].Cambridge:Cambridge University Press,1993
[13] 张宝昌.Nonferrous Metals and Their Heat Treatment(有色金属及其热处理)[M].西安:西北工业大学出版社,1993
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%