A study on prediction of deformation behavior (rolling force, equilibrium strain, spread) during rolling was accomplished with FE code ANSYS/LS-DYNA. The laboratory experiments were conducted on a two-high mill with roll diameter of 170 mm to approve the results of simulation by explicit dynamics FEM. It was found that there is a good agreement between calculated and experimental data, which means that the shape rolling could be analyzed by means of explicit dynamics FEM.
参考文献
| [1] | Liu Xiang-hua.Application of Rigid-Plastic Finite Element Method in Rolling Process[M].北京:冶金工业出版社,1994 |
| [2] | Liu Cai .Simulation of Rolling Process by Elastic-Plastic FEM[J].Journal of Northeast Institute of Heavy Machinery,1987,11(03):66-73. |
| [3] | Yanagimoto Jun;Ito Tkashi;Liu Jin-shan .FE-Based Analysis for Microstructure Evolution in Hot Bar Rolling[J].ISIJ International,2000,40(01):65-70. |
| [4] | Fukumura M;Fujikake M;Fujita F.Elastic-Plastic Finite Element Simulation of Flat Rolling Process by Dynamic Explicit Method[A].Chiba:Iron and Steel Institute of Japan,1998:260-265. |
| [5] | Iguchi T;Owen D R J;Liu G Q.Analysis of Rolling Processes by Dynamic Explicit Elastic-Plastic Finite Element Method[A].Chiba:Iron and Steel Institute of Japan,1998:266-271. |
| [6] | Esa Ervasti;Ulf Stahlberg .Behaviour of longitudinal surface cracks in the hot rolling of steel slabs[J].Journal of Materials Processing Technology,1999(2/3):141-150. |
| [7] | Esa Ervasti;Ulf Stahlberg .transversal cracks and their behaviour in the hot rolling of steel slabs[J].Journal of Materials Processing Technology,2000(1/3):312-321. |
| [8] | 刘立忠,刘相华,姜正义.利用显式动力学有限元法模拟平板轧制过程[J].塑性工程学报,2001(01):51-54. |
| [9] | 刘立忠,刘相华,周旭东,王国栋.平板轧制咬入阶段非稳定变形的有限元模拟[J].塑性工程学报,2001(03):67-70. |
| [10] | 刘立忠,张旻翊,刘相华,王国栋.隐式静力和显式动力有限元在轧制过程模拟中的应用[J].塑性工程学报,2001(04):81-83. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%