采用相同轧制工艺试制低焊接裂纹敏感性钢,对比分析了微量硼元素对显微组织和力学性能的影响.结果表明:含硼钢的屈服强度和抗拉强度比无硼钢分别要高150和105MPa,但冲击韧性明显低于无硼钢.显微组织分析可知,硼的偏聚机制使组织中保留了明显的原始奥氏体晶界,并获得具有较大有效晶粒尺寸的板条贝氏体束,同时在贝氏体板条晶界上分布着一类长棒状含硼的碳化物析出相,这些因素均降低了含硼钢的冲击韧性.
参考文献
| [1] | 齐俊杰;黄运华;张跃.微合金化钢[M].北京:冶金工业出版社,2006 |
| [2] | 贺信莱;褚幼义;张秀林 等.硼在钢中的分布[J].金属学报,1977,13(04):235. |
| [3] | Maitrepierre P;Thivellier D;Tricot R .Influence of Boron on the Decomposition of Austenite in Low Carbon Alloyed Steels[J].Metallurgical and Materials Transactions,1975,6A:287. |
| [4] | WANG X M;HE X L .Effect of Boron Addition on Structure and Properties of Low Carbon Bainitic Steels[J].ISIJ International,2002,42(supplement):S38. |
| [5] | 倪志军,张向葵.采用TMCP工艺对高强度船体结构钢EH50的研究与开发[J].钢铁,2009(05):48-51,71. |
| [6] | 李鹤林.油气输送钢管的发展动向与展望[J].焊管,2004(06):1-11. |
| [7] | G. KRAUSS;S. W. THOMPSON .Ferritic microstructures in continuously cooled low- and ultralow-carbon steels[J].ISIJ International,1995(8):937-945. |
| [8] | Diaz-Fuentes M;Iza-Mendia A;Gutierrez I .Analysis of Different Acicular Ferrite Microstructure in Low Carbon Steels by Electron Backscattered Diffraction.Study of Their Toughness Behavior[J].Metallurgical and Materials Transactions,2003,34A:2505. |
| [9] | Lambert-perlede A;Gourgues A F;Besson J .Mechanisms and Modeling of Cleavage Fracture in Simulated Heat-Affected Zone Microstructures of a High-Strength Low Alloy Steel[J].Meta-llurgical and Materials Transaction,2004,35A:1039. |
| [10] | Misra RDK;Nathani H;Hartmann JE;Siciliano F .Microstructural evolution in a new 770 MPa hot rolled Nb-Ti microalloyed steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):339-352. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%