采用Gleeble 1500热模拟试验机研究了一种新型Mn-Cr齿轮钢在不同条件下的动态再结晶行为及晶粒尺寸的变化规律,确定了该Mn-Cr齿轮钢的再结晶激活能为378.6 kJ/mol,应力指数为7.08(相对于峰值应力)或6.2(相对于稳态流变应力).Z因子唯一地决定着稳态动态再结晶的晶粒尺寸,二者之间为幂指数关系.Z因子通过影响稳态流变应力,进而影响形变储存能来改变再结晶的晶粒尺寸.
参考文献
| [1] | Samuel F H;Yue S;Jonas J J et al.Effect of Dynamic Recrystallization on Microstructural Evolution during Strip Rolling[J].ISIJ International,1990,30(03):216-225. |
| [2] | Biegus C;Lotter U;Kaspar R .Influence of Thermomechanical Treatment on the Modification of Austenite Structure[J].Steel Research International,1994,65(05):173-177. |
| [3] | 刘东升,王国栋,刘相华,王敢利,王树良.16MnCr5钢形变热处理相变和显微组织研究[J].钢铁,2001(01):47-51. |
| [4] | R. BENGOCHEA .Influence of the Prior Austenite Microstructure on the Transformation Products Obtained for C-Mn-Nb Steels after Continuous Cooling[J].ISIJ International,1999(6):583-591. |
| [5] | Peisker D;Doktorowski A;Dittrich D .Contribution on the Influence of Transformation Structures Under Consideration of Austenite Deformaton[J].Steel Research International,2001,72(03):111-114. |
| [6] | 刘战英,陈连生,周满春,刘相华,王国栋.变形条件对30MnSiV钢动态再结晶行为的影响[J].钢铁研究学报,2004(01):49-52. |
| [7] | 赵宪明,吴迪,陈学军.60Si2Mn钢动态再结晶数学模型的实验研究[J].钢铁研究学报,2003(05):32-34. |
| [8] | 王有铭;李曼云;韦光.钢材的控制轧制和控制冷却[M].北京:冶金工业出版社,1995 |
| [9] | 何宜柱,陈大宏,雷廷权,齐藤良行.形变Z因子与动态再结晶晶粒尺寸间的理论模型[J].钢铁研究学报,2000(01):26-30. |
| [10] | Atsuhiko YOSHIE;Takashi FUJITA;Masaaki FUJIOKA;Kentaro OKAMOTO;Hirofumi MORIKAWA .Formulation of Flow Stress of Nb Added Steels by Considering Work-hardening and Dynamic Recovery[J].ISIJ International,1996(4):467-473. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%